Having a hard time fitting 275/60/15 with Quick performance 9" rear end
#1
Having a hard time fitting 275/60/15 with Quick performance 9" rear end
I am trying to fit a set of 15x8 wheels with Nitto 555s on my 89 Firebird Formula 350, wheels are jeg stars I think they are 5.5" back spacing... measures 5.5" from the back of the hub to the edge of the rim, I am not 100% sure on the wheel dimensions. They are hitting the inner fender hard core even with the bump stops cut out. Rear end is a Quick performance 3rd gen 9" with yukon center and moser 35 spline axles and 4th gen camaro ss rear brakes.
They appear to stick in quite a ways just mocking it up, I wonder If I should have gotten 4.5" back spacing? Or should I run a set of 1" spacers?
Any advice much appreciated!
They appear to stick in quite a ways just mocking it up, I wonder If I should have gotten 4.5" back spacing? Or should I run a set of 1" spacers?
Any advice much appreciated!
Last edited by 89FormulaLS; 10-10-2017 at 06:19 PM.
#2
Supreme Member
Join Date: Apr 2006
Location: Northern, CA
Posts: 4,482
Likes: 0
Received 8 Likes
on
8 Posts
Car: 1989 Iroc-Z Camaro
Engine: TBI,5.0
Transmission: Automatic 700R4
Axle/Gears: Eaton Posi,3.42,LPW Ultimate Cover
Re: Having a hard time fitting 275/60/15 with Quick performance 9" rear end
"If" your going to drag I do not think spacers are recommended so I would look for a wheel that will work for you.
If there 5.5 it looks like (from the photos) you could pull off 4.5 as long as that,s enough.
Sounds like you measured correctly but just in case.
From the backside of the wheel =
If there 5.5 it looks like (from the photos) you could pull off 4.5 as long as that,s enough.
Sounds like you measured correctly but just in case.
From the backside of the wheel =
Last edited by Ron U.S.M.C.; 10-11-2017 at 02:57 AM.