TSW wheels, thoughts?
#1
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,654
Likes: 0
Received 47 Likes
on
45 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
TSW wheels, thoughts?
whats the opinion on these, havent seen anybody here with them yet
http://www.tsw.com/alloy_wheels_Nurburgring.php
looking at 18x10.5 in the gunmetal. they are reasonably priced and are rotary forged.
http://www.tsw.com/alloy_wheels_Nurburgring.php
looking at 18x10.5 in the gunmetal. they are reasonably priced and are rotary forged.
#2
Member
Re: TSW wheels, thoughts?
I my self have never used them, but I have heard them referred to as Too Soft Wheels by people in the BMW community as they tend to be very easy to bend, so Ive heard
#3
Supreme Member
iTrader: (4)
Re: TSW wheels, thoughts?
I like the design and would like to see a photoshop of them on the car. As far as TSW being "Too Soft Wheels"...there is always this debate on almost every car site. In order to manufacture and sell these wheels, they have to meet certain strength/safety standards.
I have seen a couple cars(Mustang and Lexus) with the Thruxton design and they were decent quality wheels and still looked good even after several years of use.
I have seen a couple cars(Mustang and Lexus) with the Thruxton design and they were decent quality wheels and still looked good even after several years of use.
#4
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,654
Likes: 0
Received 47 Likes
on
45 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: TSW wheels, thoughts?
the only negatives i can find are from the BMW people, and vibrations. but it seems to be an issue with the BMW's and wheels 18" and larger, since a few people have used various different wheels/manufactures and still had the issue. Typically it was corrected with a proper balance job and hub centric rings.
Im about ready to pull the trigger on these after i get back from vacation.
Im about ready to pull the trigger on these after i get back from vacation.
#6
Member
iTrader: (1)
Join Date: Aug 2010
Location: Charlotte, MI
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 sport coupe
Engine: 355
Transmission: 5speed
Axle/Gears: 3.73 detroit locker
Re: TSW wheels, thoughts?
I would love to see these photoshoped on a camaro. I was looking at these myself.
Trending Topics
#9
Supreme Member
iTrader: (2)
Join Date: May 2002
Location: Everett, WA
Posts: 4,449
Likes: 0
Received 8 Likes
on
8 Posts
Car: 87' IROC
Engine: L98
Transmission: T56
Re: TSW wheels, thoughts?
Hey 86, those are nice looking wheels. I like their Carthage wheels also.
I looked at them but it didn't look like they offered them in our bolt pattern or offsets. Did you find otherwise?
I looked at them but it didn't look like they offered them in our bolt pattern or offsets. Did you find otherwise?
#12
Senior Member
Re: TSW wheels, thoughts?
very sharp...considering these as well when i get the lsx swap done and tuned...
i actually really like the bronze.
i actually really like the bronze.
#14
Member
Join Date: Sep 2010
Location: Angleton, TX. Third Coast
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 T/A. TOTALLED!! (not by me)
Engine: TPI 5.0
Transmission: 700r4 Auto
Axle/Gears: 2.73 posi
Re: TSW wheels, thoughts?
About 14-15 years ago, I used to have a set of TSW wheels that were very similar to those called "Hockenhiem R". They were different in that they had a center cover over the lugs that had an anodized (red, blue, black or silver) simulated "nut" with a chrome safety clip so it (looked like) a true race wheel. Had them on a '91 Thunderbird SC. which was a pretty heavy car with some mods, and I never had any issues with them at all. I wish they still made those, but they have since been discontinued in the U.S. I'm told.
http://www.tsw.com/productline_classic.php They're a little more than half way down the page...
http://www.tsw.com/productline_classic.php They're a little more than half way down the page...
Last edited by 88PontiacT/A; 11-01-2011 at 04:46 AM.
#16
Member
iTrader: (1)
Join Date: Aug 2010
Location: Charlotte, MI
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 sport coupe
Engine: 355
Transmission: 5speed
Axle/Gears: 3.73 detroit locker
Re: TSW wheels, thoughts?
Might be ordering a set soon. Either gunmetal or machine face because my car will be titanium silver pearl soon, a bmw color. 17x8 and 17x9, the 8's have bmw bolt pattern. I am running beamer wheels now, but they are to narrow only 7.5 wide so no big deal. I will be useing my current tires 245/45 and 255/50 federal 595's. These are drift car tires.
Last edited by 86sc5; 11-05-2011 at 09:24 AM.
#17
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,654
Likes: 0
Received 47 Likes
on
45 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: TSW wheels, thoughts?
Had a good look at these wheels here at tsw's booth and on a bunch of cars here at the sema show and I really like them in gunmetal. The bronze is still cool too
#18
Supreme Member
iTrader: (2)
Join Date: May 2002
Location: Everett, WA
Posts: 4,449
Likes: 0
Received 8 Likes
on
8 Posts
Car: 87' IROC
Engine: L98
Transmission: T56
Re: TSW wheels, thoughts?
BTW, I really like those wheels with the machined finish. All colors will look good though.
#20
Member
Join Date: Jun 2011
Location: Jacksonville, Fl
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 RS
Engine: 305
Transmission: Built-700R4
Re: TSW wheels, thoughts?
They look good to me. These are popular with Mustangs & there are also quite a bit of vettes on the Corvette Forum running these. Never hear anything bad.
#22
Member
Join Date: Jun 2011
Location: Jacksonville, Fl
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 RS
Engine: 305
Transmission: Built-700R4
Re: TSW wheels, thoughts?
(Just fill in the drop down window)
http://www.tsw.com/showroom.php
#23
Member
iTrader: (1)
Join Date: Aug 2010
Location: Charlotte, MI
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 sport coupe
Engine: 355
Transmission: 5speed
Axle/Gears: 3.73 detroit locker
Re: TSW wheels, thoughts?
Yes adapters are needed, but not very big ones. I will be useing my current adapters. 1.25 in front to give the 17x8 which has an offset of 35mm, 4 and 5/8 backspace. This is close to many 8 inch wide wheels made for our cars that come with 0mm offset which is 4.5 backspace. In the rear I have longer studs so I will pull off my 1.25 adapter slide on my 3/8 spacer and then put the 1.25 adapter back on. This will give the 17x9 which has an offset of 50mm 5 and 3/8 bacspace. By the way 50 mm is almost 2 inches and 35 is almost 1 and 3/8 inches.
#24
Member
iTrader: (1)
Join Date: Aug 2010
Location: Charlotte, MI
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 sport coupe
Engine: 355
Transmission: 5speed
Axle/Gears: 3.73 detroit locker
Re: TSW wheels, thoughts?
If you google tsw nurgurgring images, there are lots of good pics of these wheels. I looked at alot of the silver bmw's to see how they look on those cars because thats the color I am painting my camaro.
Last edited by 86sc5; 11-06-2011 at 08:46 AM.
#25
Member
iTrader: (1)
Join Date: Aug 2010
Location: Charlotte, MI
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 sport coupe
Engine: 355
Transmission: 5speed
Axle/Gears: 3.73 detroit locker
Re: TSW wheels, thoughts?
I ordered the mirror face nurburgrings. Got them online through discount tire. Right now they are having a $ 70 savings per set and free shipping. Cost just under $800. A good deal for lightweight forged wheels. And because you have to use thinner tuner style lugs I got these. http://www.ebay.com/itm/20-PC-TUNER-...sories&vxp=mtr
Last edited by 86sc5; 11-06-2011 at 08:49 AM.
#26
Supreme Member
iTrader: (2)
Join Date: May 2002
Location: Everett, WA
Posts: 4,449
Likes: 0
Received 8 Likes
on
8 Posts
Car: 87' IROC
Engine: L98
Transmission: T56
Re: TSW wheels, thoughts?
VMS Racing Lug Nuts are Manufactured Of Aircraft High Quality A7075-T6 Forged Aluminum. These Lug Nuts are Extremely Strong And Lightweight . Each Lug Nut Weights Aprox .08 oz compared to the Average Weight of a Regular Lug Nut of 2 or 3 oz .
Wow just be careful with those lug nuts. Inspect them every time you have them off. Their ad is throwing off some bad vibes. There is no way they are are 4% the weight of a normal lug nut.
Wow just be careful with those lug nuts. Inspect them every time you have them off. Their ad is throwing off some bad vibes. There is no way they are are 4% the weight of a normal lug nut.
#27
Member
iTrader: (1)
Join Date: Aug 2010
Location: Charlotte, MI
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 sport coupe
Engine: 355
Transmission: 5speed
Axle/Gears: 3.73 detroit locker
Re: TSW wheels, thoughts?
VMS Racing Lug Nuts are Manufactured Of Aircraft High Quality A7075-T6 Forged Aluminum. These Lug Nuts are Extremely Strong And Lightweight . Each Lug Nut Weights Aprox .08 oz compared to the Average Weight of a Regular Lug Nut of 2 or 3 oz .
Wow just be careful with those lug nuts. Inspect them every time you have them off. Their ad is throwing off some bad vibes. There is no way they are are 4% the weight of a normal lug nut.
Wow just be careful with those lug nuts. Inspect them every time you have them off. Their ad is throwing off some bad vibes. There is no way they are are 4% the weight of a normal lug nut.
#28
Member
iTrader: (1)
Join Date: Aug 2010
Location: Charlotte, MI
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 sport coupe
Engine: 355
Transmission: 5speed
Axle/Gears: 3.73 detroit locker
Re: TSW wheels, thoughts?
A couple teaser pics of my nurburgrings. I'm going to get the paint done before mounting these.
#29
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,654
Likes: 0
Received 47 Likes
on
45 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: TSW wheels, thoughts?
looks good!
i actually bailed on the idea of using these. The setup i had investigated will fit the rear almost prefectly, but have a hair too much BS on the front and when all is said an done, i would still have to use a 1/2" spacer on the front to fit the wheels. Thats with 1le hubs and floating rotors. Its a shame really, i like these wheels.
Now i have to save my pennies for ccw's.....
i actually bailed on the idea of using these. The setup i had investigated will fit the rear almost prefectly, but have a hair too much BS on the front and when all is said an done, i would still have to use a 1/2" spacer on the front to fit the wheels. Thats with 1le hubs and floating rotors. Its a shame really, i like these wheels.
Now i have to save my pennies for ccw's.....
#30
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,654
Likes: 0
Received 47 Likes
on
45 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: TSW wheels, thoughts?
it appears the TSW wheel option for me will happen, hopefully this winter. Buy calling, emailing, and annoying several people from various different parts companies, i have pieced together a solution that will make this all work. Parts are ordered, and once the glorious parts pile arrives and is assembled, i will be pulling the trigger on my custom modified TSW wheels.
Now the wait begins....
Now the wait begins....
Last edited by //<86TA>\\; 01-03-2012 at 07:32 PM.
#31
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,654
Likes: 0
Received 47 Likes
on
45 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: TSW wheels, thoughts?
and the wheels are ordered! let the madness begin
#33
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,654
Likes: 0
Received 47 Likes
on
45 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: TSW wheels, thoughts?
Gun metal, but I may do some fancy paintwork to them.
#34
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,654
Likes: 0
Received 47 Likes
on
45 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: TSW wheels, thoughts?
and the wheels are canceled! Got an email this afternoon that after all this time and work with my vendor, the machine shop says the back pad of the wheel is not quite large enough to safely enlarge the bolt pattern. Needless to say im devastated, lol. Plan "b" and "c" are now on the table.....
the quest for wheels continues....
the quest for wheels continues....
#35
Supreme Member
iTrader: (2)
Join Date: May 2002
Location: Everett, WA
Posts: 4,449
Likes: 0
Received 8 Likes
on
8 Posts
Car: 87' IROC
Engine: L98
Transmission: T56
Re: TSW wheels, thoughts?
and the wheels are canceled! Got an email this afternoon that after all this time and work with my vendor, the machine shop says the back pad of the wheel is not quite large enough to safely enlarge the bolt pattern. Needless to say im devastated, lol. Plan "b" and "c" are now on the table.....
the quest for wheels continues....
the quest for wheels continues....
What is plan b and c?
#36
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,654
Likes: 0
Received 47 Likes
on
45 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: TSW wheels, thoughts?
yeah, thats my problem.....
B is find something else in teh same price range that looks good and does the job, which is about impossible.
C is CCW, either classics or lm5's. But honestly, i dont want to spend that kind of money on wheels, thats why the tsw's were so attractive.
However, i received another email, and there is still a small sliver of hope left for TSW...
What is plan b and c?
C is CCW, either classics or lm5's. But honestly, i dont want to spend that kind of money on wheels, thats why the tsw's were so attractive.
However, i received another email, and there is still a small sliver of hope left for TSW...
#37
Supreme Member
iTrader: (5)
Join Date: Mar 2011
Location: Central Texas
Posts: 2,893
Likes: 0
Received 4 Likes
on
4 Posts
Car: GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: Aussie 9-bolt/3.27 posi
Re: TSW wheels, thoughts?
and the wheels are canceled! Got an email this afternoon that after all this time and work with my vendor, the machine shop says the back pad of the wheel is not quite large enough to safely enlarge the bolt pattern. Needless to say im devastated, lol. Plan "b" and "c" are now on the table.....
the quest for wheels continues....
the quest for wheels continues....
#38
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,654
Likes: 0
Received 47 Likes
on
45 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: TSW wheels, thoughts?
the bolt pattern was being altered, which apparently is quite common, there was just not enough meat left in the pad afterwards. This was a process that was brought to my attention, not something i knew about or suggested.
#39
Member
iTrader: (1)
Join Date: May 2004
Location: New Port Richey, Fl
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Trans Am
Engine: 6.6 at least
Transmission: T-56 (waiting)
Axle/Gears: 9" w/4.56 & spool (4 now)
Re: TSW wheels, thoughts?
They would look better with a lip.....they look importish to me....
#41
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,654
Likes: 0
Received 47 Likes
on
45 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: TSW wheels, thoughts?
i inadvertently stumbled onto "plan b".....
#43
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,654
Likes: 0
Received 47 Likes
on
45 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: TSW wheels, thoughts?
these, x4
http://www.apexraceparts.com/ARC-8-1...set_p_111.html
same wheel specs, lighter, more spokes. 5x120 pattern, that hopefully i can have altered by simply redrilling slightly to make up the .65mm difference between holes. I have a couple phone calls to make.
and i got in a GP on another forum for free shipping and some decent money off. If all goes well, these will be cheaper than the tsw's, minus the machine work.
http://www.apexraceparts.com/ARC-8-1...set_p_111.html
same wheel specs, lighter, more spokes. 5x120 pattern, that hopefully i can have altered by simply redrilling slightly to make up the .65mm difference between holes. I have a couple phone calls to make.
and i got in a GP on another forum for free shipping and some decent money off. If all goes well, these will be cheaper than the tsw's, minus the machine work.
#46
Supreme Member
Thread Starter
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,654
Likes: 0
Received 47 Likes
on
45 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: TSW wheels, thoughts?
dont need tuner lugs for this wheel, since the are 5x120, i will have them corrected to 5x120.65. It will probably involve the same type inserts are before.
Thread
Thread Starter
Forum
Replies
Last Post
Fronzizzle
Suspension and Chassis
6
03-18-2019 08:29 PM
CarGuyDennis
Organized Drag Racing and Autocross
137
12-06-2016 11:02 PM
backtothe80s
Suspension and Chassis
33
09-05-2015 12:39 AM