Considering Pro Stars for my IROC - will these work?
08-17-2011, 09:22 AM
#1
Senior Member
Thread Starter
Join Date: Jul 1999
Location: Houston
Posts: 792
Likes: 0
Received 0 Likes
on
0 Posts
Considering Pro Stars for my IROC - will these work?
The tires are 15*8 in the rear and 15*3 1/2 in the front. The lug nuts are 1/2" lug studs. The lug pattern is 5 on 4 3/4. - The fronts are 1 3/4" and the rears are 5 1/2" cause they are 15x3.5 front and 15x8 rear - would these fit on my IROC, or do I need anything else as well?
Last edited by 89IROCZZ4; 08-17-2011 at 03:00 PM.
08-17-2011, 06:07 PM
#2
Supreme Member
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,652
Likes: 0
Received 46 Likes
on
44 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: Considering Pro Stars for my IROC - will these work?
are those numbers the backspacing? front should be fine, the rear should be 4.5". 5.5 will work, but will put the wheel firther in than stock, and if you use a wide tire, you could have rubbing issues.
the stock wheel studs are 12mm1.5 BTW, not 1/2". and the bolt pattern in 5x4.75
08-17-2011, 06:41 PM
#3
Senior Member
Thread Starter
Join Date: Jul 1999
Location: Houston
Posts: 792
Likes: 0
Received 0 Likes
on
0 Posts
Re: Considering Pro Stars for my IROC - will these work?
yes those are the backspacing numbers. The tire is a 275 tire on them. will that cause rubbing you think? i wonder if there are any pictures of 5.5 backspacing on the iroc ... time to search methinks!
08-19-2011, 11:24 PM
#4
Supreme Member
Join Date: Apr 2006
Location: Northern, CA
Posts: 4,482
Likes: 0
Received 8 Likes
on
8 Posts
Car: 1989 Iroc-Z Camaro
Engine: TBI,5.0
Transmission: Automatic 700R4
Axle/Gears: Eaton Posi,3.42,LPW Ultimate Cover
Re: Considering Pro Stars for my IROC - will these work?
The Weld Pro-Stars are my favorite. I hope you can make it work.
Last edited by Ron U.S.M.C.; 08-19-2011 at 11:30 PM.
08-20-2011, 07:16 AM
#5
Junior Member
Join Date: Jan 2011
Location: Kansas
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Z/28
Engine: 5.7 TPI
Transmission: 700R4
Re: Considering Pro Stars for my IROC - will these work?
ProStars look great on these cars..
..I originally wanted to run a set of them on mine, but found a nice set of used DragLites for cheap.....
..I originally wanted to run a set of them on mine, but found a nice set of used DragLites for cheap..... 
Thread
Thread Starter
Forum
Replies
Last Post
92camaroJoe
Tech / General Engine
6
08-13-2015 06:07 AM
mustangman65_79
Body
3
08-11-2015 03:17 PM
