Valve stem seals...
#1
Junior Member
Thread Starter
Join Date: Feb 2019
Location: Slovenia
Posts: 28
Received 0 Likes
on
0 Posts
Car: Camaro rs 1991, BMW e39, F11
Engine: V6 3.1
Transmission: 5 speed manual
Axle/Gears: Stock
Valve stem seals...
Hello, I need to repleace valve stem seals on my 3.1 v6 1991
In the kit I got 6 positive seals and 12 o-rings.
I`m confused because I got 12 o-rings, old o-rings were destroyed and felt apart while removing the springs.
I know that positive seals were on the intake valves and o-ring seals on the exhaust valves, but not sure if o-rings were also on intake valves.
So I need to put positive seals on intake valves, o-rings on exhaust valves, but do I also need to put o-rings on intake valves?
Thank you for help
In the kit I got 6 positive seals and 12 o-rings.
I`m confused because I got 12 o-rings, old o-rings were destroyed and felt apart while removing the springs.
I know that positive seals were on the intake valves and o-ring seals on the exhaust valves, but not sure if o-rings were also on intake valves.
So I need to put positive seals on intake valves, o-rings on exhaust valves, but do I also need to put o-rings on intake valves?
Thank you for help
The following users liked this post:
NoEmissions84TA (11-21-2019)
#3
Junior Member
Thread Starter
Join Date: Feb 2019
Location: Slovenia
Posts: 28
Received 0 Likes
on
0 Posts
Car: Camaro rs 1991, BMW e39, F11
Engine: V6 3.1
Transmission: 5 speed manual
Axle/Gears: Stock
Re: Valve stem seals...
Thank you for help
Thread
Thread Starter
Forum
Replies
Last Post