2.8 MPI Camaro engine bolts
#1
2.8 MPI Camaro engine bolts
I recently purchased a 1986 Camaro SC with a 2.8 MPI engine. The problem is that the kid who had it had started to replace parts like the water pump and alternator and LOST THE BOLTS FOR THE PLENUM AND EVERYTHING ELSE ON TOP OF THE ENGINE.
i have been trying to locate a source to replace the bolts but I am not having any luck. Any help at this point would be greatly appreciated.
i have been trying to locate a source to replace the bolts but I am not having any luck. Any help at this point would be greatly appreciated.
The following users liked this post:
Brokeboy (07-26-2019)
#3
Moderator
iTrader: (2)
Re: 2.8 MPI Camaro engine bolts
Most can be replaced using hardware store (or bolt fastener store) sourced bolts.
Only a few that come to mind that you will likely need to hit up a wrecking yard for, and those are some of the water pump bolts, since they are usually longer than what is commonly available.
Only a few that come to mind that you will likely need to hit up a wrecking yard for, and those are some of the water pump bolts, since they are usually longer than what is commonly available.
The following users liked this post:
Brokeboy (07-26-2019)
Thread
Thread Starter
Forum
Replies
Last Post
Darkshot
Transmissions and Drivetrain
2
08-05-2009 07:35 PM