looking to do some head work.
#1
Member
Thread Starter
looking to do some head work.
ive been wanting to do a good cam on my car to give it lope and i decided it be best to get better flowing heads and intake to get the best and wa wondering what options do i have do 3500 aluminum heads mount up to my 3.1 and if so the i can add a 3100 supercharger to i think either way just focusing on heads at this point what options do i have to get the best flow.
#3
Supreme Member
iTrader: (2)
Join Date: Mar 2011
Location: Northwest Ohio
Posts: 6,274
Likes: 0
Received 25 Likes
on
19 Posts
Car: 1991 Camaro RS
Engine: BBC 509 Merlin ii 9.6:1 pump gas
Transmission: ATI pro th350 sfi case. TSI 5500 st
Axle/Gears: Strange S60 4:10s
Re: looking to do some head work.
3500 heads wont go onto a 3.1L or a 2.8L.
3500 only will fit up to a 3400 or obvously a 3500.
You can use 3100/3400 heads on the 3.1L but make sure you get the large port ones. I cant remember the years off hand as im new to the whole hybrid thing but I know my 2002 3400 impala heads are large ports.
3500 only will fit up to a 3400 or obvously a 3500.
You can use 3100/3400 heads on the 3.1L but make sure you get the large port ones. I cant remember the years off hand as im new to the whole hybrid thing but I know my 2002 3400 impala heads are large ports.
Last edited by fasteddi; 01-29-2014 at 04:41 PM.
#7
Supreme Member
iTrader: (3)
Re: looking to do some head work.
If you are going to do all the work of swapping a 4.3, you can put in a 350 for the same amount of effort and a better outsome. a 4.3 is literally a 350 with 2 cylinders missing. The mounting is the same, the trans needed is the same.....
Trending Topics
#8
Member
Thread Starter
Re: looking to do some head work.
yea and id be jumping on the " just swap a v8" wagon i wana be different not a follower but either way a 350 may be better
#9
Supreme Member
iTrader: (2)
Join Date: Mar 2011
Location: Northwest Ohio
Posts: 6,274
Likes: 0
Received 25 Likes
on
19 Posts
Car: 1991 Camaro RS
Engine: BBC 509 Merlin ii 9.6:1 pump gas
Transmission: ATI pro th350 sfi case. TSI 5500 st
Axle/Gears: Strange S60 4:10s
Re: looking to do some head work.
If u want to swap to a v8 then do it. If not then stick with the v6 and make some hp. You have a great engine that can take some abuse and a good ECM toe sizably tune. It's possible. There was a solid 14.90s all motor 3.1l v6 on here and my high 12 sec turbo 3.1 so it is possible. Just saying.....
Thread
Thread Starter
Forum
Replies
Last Post
2QUIK4U
TPI
6
09-01-2015 09:50 PM