Coil mounting place?
#1
Member
Thread Starter
Join Date: Feb 2013
Posts: 226
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 camaro rs
Engine: 3.1 - looking to upgrade to 3400 hy
Transmission: 700r4
Axle/Gears: Stock? Lol
Coil mounting place?
1991 camaro 3.1
I just got my msd streetfire coil in and installed it and have no problems but I've been reading that some people have problems with overheating them in the stock mounting area? Where should it go?
Is it ok in the stock mounting place?
Posted from Thirdgen.org App for Android
I just got my msd streetfire coil in and installed it and have no problems but I've been reading that some people have problems with overheating them in the stock mounting area? Where should it go?
Is it ok in the stock mounting place?
Posted from Thirdgen.org App for Android
#2
Supreme Member
iTrader: (2)
Join Date: Mar 2011
Location: Northwest Ohio
Posts: 6,274
Likes: 0
Received 25 Likes
on
19 Posts
Car: 1991 Camaro RS
Engine: BBC 509 Merlin ii 9.6:1 pump gas
Transmission: ATI pro th350 sfi case. TSI 5500 st
Axle/Gears: Strange S60 4:10s
Re: Coil mounting place?
this coil??
Its ok to leave it where it is, but id reccomend mounting it away from the manifolds a bit. Over on the firewall, just try to keep it away from the heat as much as possible so it last longer.
Its ok to leave it where it is, but id reccomend mounting it away from the manifolds a bit. Over on the firewall, just try to keep it away from the heat as much as possible so it last longer.
#3
Member
Thread Starter
Join Date: Feb 2013
Posts: 226
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 camaro rs
Engine: 3.1 - looking to upgrade to 3400 hy
Transmission: 700r4
Axle/Gears: Stock? Lol
Yeah I got that one. I love it. Do you hav a picture of how you have yours mounted?
Posted from Thirdgen.org App for Android
Posted from Thirdgen.org App for Android
#4
Supreme Member
iTrader: (1)
Re: Coil mounting place?
I can show ya where mine ended up (hanging around the firewall next to the distributor) . Just make sure to run a wire from the coil's metal frame to any good ground and you know for SURE there wont be any weird radio interference or such . I seldom change the stock configuration on anything if I don't have to , but the coil mounted right over the exhaust manifold was one GM mistake that I just couldn't in good conscience not rectify .......
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
06-13-2021 01:13 PM