B&M Transpack question.
#1
Junior Member
Thread Starter
Join Date: Jul 2013
Location: Philadelphia
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Car: '87 Trans Am GTA
Engine: 5.7L 350cu.
Transmission: 700r4
Axle/Gears: Stock
B&M Transpack question.
Hey, I was looking over the instructions for the transpack and it seems that only one or two replacement part are in there that make any difference. The other mods are removing springs/check ***** and drilling holes in the plate... Is there a problem with just doing the drilling and removing mods without buying the kit?
Here's the instruction manual:
http://bmracing.com/wp-bnmcont/uploads/70235.pdf
Thanks guys.
Here's the instruction manual:
http://bmracing.com/wp-bnmcont/uploads/70235.pdf
Thanks guys.
#3
Moderator
Join Date: Aug 2004
Location: Nanticoke, Pa
Posts: 1,367
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Firebird
Engine: 406 CI
Transmission: Pete K 700R4
Axle/Gears: 3:55
Re: B&M Transpack question.
Hey, I was looking over the instructions for the transpack and it seems that only one or two replacement part are in there that make any difference. The other mods are removing springs/check ***** and drilling holes in the plate... Is there a problem with just doing the drilling and removing mods without buying the kit?
Here's the instruction manual:
http://bmracing.com/wp-bnmcont/uploads/70235.pdf
Thanks guys.
Here's the instruction manual:
http://bmracing.com/wp-bnmcont/uploads/70235.pdf
Thanks guys.
Thread
Thread Starter
Forum
Replies
Last Post
ZZ3Astro
Power Adders
1045
08-13-2019 12:57 AM