Tapping noise from torque converter/flywheel area
#1
Tapping noise from torque converter/flywheel area
Hello, I've owned my Camaro(91 RS 305 TBI) for just over a month now, and I've noticed a tapping that is loud out of gear (P/N) and quiets but doesn't quit in gear (R/OD/D/2/1).
It is really prominent when coming down from around 2500RPM to idle.
My father in law and I have looked under the inspection plate made sure all bolts are tight on TC and flywheel.
We also inspected for cracks on Flywheel but didn't notice anything.
I took it to one of our local guys who suggested it could be the starter pinion not returning all the way, which is the least labor and time intensive part to replace. I just wanted to know if anyone else has had a similar problem, or can vouch for this?
Outline for easier look over:
Thanks in advance!
Jam
It is really prominent when coming down from around 2500RPM to idle.
My father in law and I have looked under the inspection plate made sure all bolts are tight on TC and flywheel.
We also inspected for cracks on Flywheel but didn't notice anything.
I took it to one of our local guys who suggested it could be the starter pinion not returning all the way, which is the least labor and time intensive part to replace. I just wanted to know if anyone else has had a similar problem, or can vouch for this?
Outline for easier look over:
- Tapping from Torque Converter/Flywheel area
- Bolts are tight on TC/Flywheel
- No cracks noticed on Flywheel
- Louder out of gear that in gear
Thanks in advance!
Jam
#2
Supreme Member
iTrader: (1)
Join Date: Sep 2005
Posts: 26,115
Received 1,688 Likes
on
1,283 Posts
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: Tapping noise from torque converter/flywheel area
Cracks inthe flex plate will be right near the center, usually right around the bolt holes, and VERY hard to see with the whole thing assembled.
That sounds like the most likely cause.
See my signature for a helpful mental discipline.
That sounds like the most likely cause.
See my signature for a helpful mental discipline.
#4
Member
iTrader: (1)
Join Date: Oct 2009
Location: Mountlake Terrace, Wa
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Iroc + 83 Firebird
Engine: Iroc 305 TPI, Firebird 305 4bbl
Transmission: 700r4 in both.
Axle/Gears: Iroc 3.27 Firebird 3.23
Re: Tapping noise from torque converter/flywheel area
Thread
Thread Starter
Forum
Replies
Last Post
gta892000
Cooling
6
09-16-2015 12:37 AM
Ragtop Man
Transmissions and Drivetrain
2
09-12-2015 12:23 AM
dimented24x7
Tech / General Engine
4
09-06-2015 03:51 PM