clutch question.. immediate attention.may need to return
#1
Member
Thread Starter
Join Date: Apr 2010
Location: tuckerton nj
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 camaro,88 firebird
Engine: 2.8 v6,5.0 tpi
Transmission: manual
Axle/Gears: 3.47
clutch question.. immediate attention.may need to return
i bought a clutch kit from rockauto.com.. and i was fiddling with it n i noticed the clutch wasnt the exact size of the pressure plate it was slightly bigger.is this a problem? and do these pics look ok?
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
#2
Supreme Member
iTrader: (2)
Join Date: Sep 2003
Location: Woodland, CA
Posts: 10,494
Likes: 0
Received 3 Likes
on
3 Posts
Car: '02 Z06
Engine: L33 5.7
Transmission: T56
Axle/Gears: Stock IRS
Re: clutch question.. immediate attention.may need to return
the clutch should not be covering the pressure plate to flywheel mounting bolts, I think you have an issue on your hand.
I can pull a stock clutch off my shelf on friday and take measurements for you if you like.
I can pull a stock clutch off my shelf on friday and take measurements for you if you like.
#3
Member
Thread Starter
Join Date: Apr 2010
Location: tuckerton nj
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 camaro,88 firebird
Engine: 2.8 v6,5.0 tpi
Transmission: manual
Axle/Gears: 3.47
Re: clutch question.. immediate attention.may need to return
#6
Supreme Member
iTrader: (2)
Join Date: Sep 2003
Location: Woodland, CA
Posts: 10,494
Likes: 0
Received 3 Likes
on
3 Posts
Car: '02 Z06
Engine: L33 5.7
Transmission: T56
Axle/Gears: Stock IRS
Re: clutch question.. immediate attention.may need to return
can you post your clutch and pressure plate diameters?
#7
Member
iTrader: (2)
Join Date: Nov 2009
Location: Hubert, NC
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
Car: 83 Z28
Engine: F-body LT1 swap
Transmission: T-56 swap
Axle/Gears: 10 bolt w/ 28 spl posi, 4.10, disks
Re: clutch question.. immediate attention.may need to return
Looks like you got an 11" clutch disk with a 10.5" pressure plate. You need the matching 10.5" clutch disk.
Trending Topics
#8
Supreme Member
iTrader: (2)
Join Date: Sep 2003
Location: Woodland, CA
Posts: 10,494
Likes: 0
Received 3 Likes
on
3 Posts
Car: '02 Z06
Engine: L33 5.7
Transmission: T56
Axle/Gears: Stock IRS
Re: clutch question.. immediate attention.may need to return
hope this helps, typical installed set, what it should look like, and 10.5" length.
#9
Junior Member
Join Date: Jun 2009
Location: Austin, TX.
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Car: 93 S10 RCSB
Engine: Corvette LT1
Transmission: 93 M29 T56
Axle/Gears: 8 3/4
Re: clutch question.. immediate attention.may need to return
You def dont have a matched set there.
I have a quick question i hope can be answered, can you run the 14" 168 tooth flywheel and 11" clutch inside the stock third gen T5 bellhousing? Is there enough clearance? Im swapping in a stock TBI 350 into my 93 S10 and want to keep my stock WC T5 using the astro van 11" clutch and a third gen T5 bellhousing.
Thanks for the help, its greatly appreciated.
I have a quick question i hope can be answered, can you run the 14" 168 tooth flywheel and 11" clutch inside the stock third gen T5 bellhousing? Is there enough clearance? Im swapping in a stock TBI 350 into my 93 S10 and want to keep my stock WC T5 using the astro van 11" clutch and a third gen T5 bellhousing.
Thanks for the help, its greatly appreciated.
Thread
Thread Starter
Forum
Replies
Last Post