TV Cable Issue
#1
Junior Member
Thread Starter
Join Date: Jun 2009
Location: Orange County, CA
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro sports coupe
Engine: LS1
Transmission: T56
Axle/Gears: 3.42
TV Cable Issue
question guys how do I adjust my tv cable on my 89 iroc 5.7 TPI
#2
Member
iTrader: (4)
Join Date: Apr 2006
Location: Amherst NY
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
Re: TV Cable Issue
There is a little metal tab on the inside of the TV cable just past where it locks into your TBI bracket. Push it in and slide it forward, its only going to take little movements, you can just drive down a road and notice when the sifts happen pull over and adjust it a little at a time till you get it right.
#4
Junior Member
Thread Starter
Join Date: Jun 2009
Location: Orange County, CA
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro sports coupe
Engine: LS1
Transmission: T56
Axle/Gears: 3.42
Re: TV Cable Issue
There is a little metal tab on the inside of the TV cable just past where it locks into your TBI bracket. Push it in and slide it forward, its only going to take little movements, you can just drive down a road and notice when the sifts happen pull over and adjust it a little at a time till you get it right.
#5
Supreme Member
iTrader: (29)
Join Date: Sep 1999
Location: Location, Location!
Posts: 1,410
Likes: 0
Received 2 Likes
on
2 Posts
Car: 92 T/A 'vert
Engine: Mild .040 over L98 4 bolt mains
Transmission: Mostly stock 700R4, 2600 Vigilante
Axle/Gears: LS1 3.42
Re: TV Cable Issue
There is a little metal tab on the inside of the TV cable just past where it locks into your TBI bracket. Push it in and slide it forward, its only going to take little movements, you can just drive down a road and notice when the sifts happen pull over and adjust it a little at a time till you get it right.
#6
Junior Member
Thread Starter
Join Date: Jun 2009
Location: Orange County, CA
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro sports coupe
Engine: LS1
Transmission: T56
Axle/Gears: 3.42
#7
Supreme Member
iTrader: (29)
Join Date: Sep 1999
Location: Location, Location!
Posts: 1,410
Likes: 0
Received 2 Likes
on
2 Posts
Car: 92 T/A 'vert
Engine: Mild .040 over L98 4 bolt mains
Transmission: Mostly stock 700R4, 2600 Vigilante
Axle/Gears: LS1 3.42
Re: TV Cable Issue
Works on any 700R4 or 200-4R, regardless of induction style.
Trending Topics
#9
Member
iTrader: (4)
Join Date: Apr 2006
Location: Amherst NY
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
Re: TV Cable Issue
http://www.chevyhiperformance.com/te...ble/index.html
its the same thing but here is the correct one for your car
its the same thing but here is the correct one for your car
#10
Member
iTrader: (9)
Join Date: May 2006
Location: Ruston. WA
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 IrocZ Vert
Engine: 5.0 TPI
Transmission: 700R4
Axle/Gears: 3.73
Re: TV Cable Issue
I'm having an issue with the TV cable. The car wasn't downshifting properly and when i tried adjusting it I pushed the cable all the way in and when i rotate the throttle all the way forward the cable doesn't adjust out. any ideas?? dont mean to hijack the thread just figured it was a good place for the question...
#11
Member
iTrader: (4)
Join Date: Apr 2006
Location: Amherst NY
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
Re: TV Cable Issue
You can just pull it back out if its nots pulling out its self some times one or two notches is al lit take to make the difference, I would recomemend that after you get it adjusted you mark it some how so if you have to move it later you can get it right back
Thread
Thread Starter
Forum
Replies
Last Post
TheTraut88
Engine/Drivetrain/Suspension Parts for Sale
1
09-07-2015 05:22 PM