i don't know what to do about my trans
#1
Senior Member
Thread Starter
iTrader: (3)
Join Date: Apr 2008
Location: Somerset, New Jersey
Posts: 806
Likes: 0
Received 0 Likes
on
0 Posts
Car: 95 Z85 S10, 99 Formula
Engine: 4.3 CPI , LS1
Transmission: NV3500, T56
Axle/Gears: 3.08, 3.42
i don't know what to do about my trans
so for a while its been shifting weird and i figured it was the TV cable. i adjusted it and it helped a little but still not that great. yesterday i noticed under the car a pool of trans fluid, the gasket on the pan is shot. the car/trans is a little over 100,000 miles.
btw: its a 700R4
what should i do with it next?
i've been saving/planning to get the exhaust finished (right now its just headers, y pipe, and a temp cat.) when i planned to take it to the shop i was gonna ask them to check the TV cable as well.
should i get the trans serviced + a new pan gasket? i heard its about 150 bucks, but if i'm getting a new trans or rebuilding it i think thats a 150 i dont need to spend.
i'm kind of hesitant to go take it rebuilt as i've heard of the labor costs.
so here are the options i have so far.
get the exhaust done and while its there just have them look at it and see if it is just the tv cable and a worn out gasket.
buy a rebuilt trans
get a book, do some reading, look at pictures, and rebuild it myself.
any ideas?
btw: its a 700R4
what should i do with it next?
i've been saving/planning to get the exhaust finished (right now its just headers, y pipe, and a temp cat.) when i planned to take it to the shop i was gonna ask them to check the TV cable as well.
should i get the trans serviced + a new pan gasket? i heard its about 150 bucks, but if i'm getting a new trans or rebuilding it i think thats a 150 i dont need to spend.
i'm kind of hesitant to go take it rebuilt as i've heard of the labor costs.
so here are the options i have so far.
get the exhaust done and while its there just have them look at it and see if it is just the tv cable and a worn out gasket.
buy a rebuilt trans
get a book, do some reading, look at pictures, and rebuild it myself.
any ideas?
Last edited by Convoy25; 04-02-2010 at 07:22 AM.
Thread
Thread Starter
Forum
Replies
Last Post
maroe624
Transmissions and Drivetrain
4
04-16-2017 08:29 AM
eightsixseven
Tech / General Engine
1
08-14-2015 03:09 PM