86firebird350

my car has been making a grinding type of noise when i go over speed bumps or reverse direction. its done this ever since i broke my transmission mount and replaced it with a poly mount. ive checked under the car and there doesnt appear to be any thing rubbing. can anyone help me out?


also, my rear end has started to make noise as well when i make somewhat sharp turns. it has an eaton limited slip differential and motive 3.42 gears that are only about 8 months old so im a bit confused as to why its making noise and why its doing it now. if any of you guys can help with either of these problems, it would be greatly appreciated.

WIll36

iTrader: (12)

is this noise like gears grinding when you miss a shift or something not as profound?

86firebird350

it doesnt sound like gears grinding. it does sound like a metal hitting metal type of sound, almost like the exhaust is rubbing on the bottom of the car whenever the chassis flexes but ive looked and theres no indication of rubbing anywhere.

DJP87Z28

Check the dust shields on the rear brakes. that might be the sound you are hearing.

JamesC

iTrader: (5)

Exhaust pipe on panhard?

JamesC

86firebird350

i havent checked that, but why would that be what im hearing after breaking and replacing a transmission mount?

86firebird350

i havent checked this either, but i wouldnt think that would be a problem.

DJP87Z28

Broken tack weld and making noise when hitting a bump or rough road.