91ws6formula

i have a 1991 firebird that has the wiring for an signal pick-up coil for the electronic speedo...but someone replaced the stock 700r with an earlier 700r which is a gear driven electronic speedo, needed to get my speedo hooked up i didnt know what would be the best route to go with this. Can i find a older car with the right wiring clip that i need for the gear driven speedo and splice with my wiring or will that not work? or do i need take off the tailshaft and switch all of that around? any help with be appreciated

krisb410

iTrader: (9)

Just replace the speedometer pickup, on the side of the tail housing, with an electronic VSS and the right gear. I have like 3 spares if ya need one.

91ws6formula

so there is a electronic gear driven speedo with the right wiring clip that i need?

Kevin91Z

iTrader: (1)

Yes you will need any 90-92 Camaro or Firebird vehicle speed sensor (VSS) from a 700R4. You'll also need the right plastic speedo gears to make the speedometer accurate. You can search this forum for more info on that.

krisb410

iTrader: (9)

I have 3 of them as spares, and a few different gears. Let me know. I work at a dealer, so I could get the gear you need at my cost if I don't have it already.