700R4 question
09-09-2007, 03:04 AM
#1
Junior Member
Thread Starter
Join Date: Oct 2006
Location: Wigan, England
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Trans Am 5.0
Engine: 305
Transmission: 700R4
700R4 question
I have started rebuilding my trans which is a early '87 and i bought a reverse input drum that turned out to be for a later trans,so i had to buy a later reverse input piston.The problem i now have is with the clutch pack,the manual i have shows a extra plate for later transmissions,a bellville plate,my question is does the bellville plate have to be used or can i just fit my clutch pack for earlier the trans.
Thanks for any help.
Thanks for any help.
09-09-2007, 03:19 AM
#2
Senior Member
Join Date: Sep 2007
Location: Leander,TX
Posts: 568
Likes: 0
Received 1 Like
on
1 Post
Car: 84 Z28 / 88 Trans Am / 87 base
Engine: L69 H.O. / 468 BBC / 2.8 v6
Transmission: 89 700R4 / TH375B / 700R4
Axle/Gears: 3.73 open / 3.23 posi / 3.42 open
Re: 700R4 question
your best bet is to set it up with the belville plate. that was one of GM's upgrades.
09-09-2007, 04:34 AM
#3
Junior Member
Thread Starter
Join Date: Oct 2006
Location: Wigan, England
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Trans Am 5.0
Engine: 305
Transmission: 700R4
Re: 700R4 question
Thanks for that,i will see if i can get just the plate from one of the trans suppliers on e bay or the full clutch pack for reverse input.
Thread
Thread Starter
Forum
Replies
Last Post
Iroc8t8
TPI
43
08-26-2015 08:14 AM