Need SD TPI VSS info
#1
Supreme Member
Thread Starter
Join Date: Sep 2001
Location: MN
Posts: 1,355
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2009 Pontiac G8 GXP
Engine: LS3
Transmission: 6L80E
Axle/Gears: 3.27
Need SD TPI VSS info
I need a VSS as part of my swap to SD (730 ECM) with a T-5.
The trans in there had a cable VSS...
Both the dealer and the parts stores say there are two options:
First: RPO Code D81 or D89 (original GM part # of 10456022 or 10456089)
Second: RPO Code D8M or D8G (GM Parts # of 10456020 or 10456087)
The cost of one is $42 while the other is $90...Is one for a TBI and the other for TPI?
Tell me I can use the cheaper option...
TIA,
The trans in there had a cable VSS...
Both the dealer and the parts stores say there are two options:
First: RPO Code D81 or D89 (original GM part # of 10456022 or 10456089)
Second: RPO Code D8M or D8G (GM Parts # of 10456020 or 10456087)
The cost of one is $42 while the other is $90...Is one for a TBI and the other for TPI?
Tell me I can use the cheaper option...
TIA,
#2
Supreme Member
Thread Starter
Join Date: Sep 2001
Location: MN
Posts: 1,355
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2009 Pontiac G8 GXP
Engine: LS3
Transmission: 6L80E
Axle/Gears: 3.27
Also...after doing some more checking around...there are two different VSS's for an auto and one for the manual...but no one can tell me which one I need!
Any input would be welcome...
Thanks,
Any input would be welcome...
Thanks,
#3
Supreme Member
Thread Starter
Join Date: Sep 2001
Location: MN
Posts: 1,355
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2009 Pontiac G8 GXP
Engine: LS3
Transmission: 6L80E
Axle/Gears: 3.27
Still no answer...
Also, I found a VSS that a friend had that I believe is from a 91 Chevy truck with the 350/700F4 combo...it has the bolt hole in the wrong spot and a larger diameter body...Will that work?
I am going tomorrow to pick up both of the VSS options that I ordered...I just wish I knew which one was correct...
Also, I found a VSS that a friend had that I believe is from a 91 Chevy truck with the 350/700F4 combo...it has the bolt hole in the wrong spot and a larger diameter body...Will that work?
I am going tomorrow to pick up both of the VSS options that I ordered...I just wish I knew which one was correct...
Thread
Thread Starter
Forum
Replies
Last Post
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
08-12-2015 03:41 PM