flywheel help... needed by tonight
06-02-2003, 07:41 PM
#1
Senior Member
Thread Starter
flywheel help... needed by tonight
guys... i need the specs on a flywheel for a 89 iroc... doing a 5sp conversion....
is 10 1/2, 11, 12, inches is it 153 or 168 tooth... i know its the smaller bolt pattern...etc etc.... just lemme know the basics that i will have to tell they guy.
is 10 1/2, 11, 12, inches is it 153 or 168 tooth... i know its the smaller bolt pattern...etc etc.... just lemme know the basics that i will have to tell they guy.
06-02-2003, 09:59 PM
#3
Senior Member
iTrader: (1)
Join Date: Jan 2000
Location: Clifton, NJ
Posts: 640
Likes: 0
Received 1 Like
on
1 Post
Car: '88 Formula
Engine: 350 TPI
Transmission: T-5... in need of slight rebuild
Well it should be the smaller 153 tooth flywheel (the larger one wont fit in the bellhousing), make sure your starter will bolt up right too. For the clutch, the only one to fit that flywheel is the 10.4".
Thread
Thread Starter
Forum
Replies
Last Post