TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

Rough Idle

Thread Tools
 
Search this Thread
 
Old 08-28-2014, 08:45 PM
  #1  
Junior Member

Thread Starter
iTrader: (2)
 
19875speed's Avatar
 
Join Date: Apr 2012
Location: Pennsylvania
Posts: 64
Likes: 0
Received 1 Like on 1 Post
Car: 1989 Formula Firebird
Engine: 305 TPI
Transmission: 5-speed
Axle/Gears: 3:45
Rough Idle

I have an 89 formula TPI 5 speed, just had someone change the plugs, wires, cap and rotor. AC Delco plugs, autolite wires and stock cap and rotor. It ran terrible after they were changed, 2 of the plugs were not gaped right on the driver side so the mechanic re gaped them took the car for a ride and it ran a lot better but there is still a miss at idle. I think he gaped them around 0.42 but didn't check the gap on 2 of the plugs on the passenger side. Not sure if I should get a new set of plugs and have them changed or could it be a separate issue? Any ideas let me know. thanks!
Old 08-29-2014, 06:37 AM
  #2  
Member
 
BHicks's Avatar
 
Join Date: Apr 2007
Location: NC
Posts: 138
Likes: 0
Received 0 Likes on 0 Posts
Car: 1986 Monte Carlo SS Aerocoupe
Engine: L69 305 H.O.
Transmission: 200-4R
Axle/Gears: 3.73
Re: Rough Idle

I guess it could be incorrect gap. I think factory my car calls for .35(89 tpi 305) the decal under hood says so. Could be a cracked plug, or wire not on completely or first thing I'd look at are wires on correctly in firing order? A crossed up wire will make it run like anus
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GeneralIesrussi
Carburetors
5
01-20-2020 01:06 PM
IROCtometal
TPI
2
09-20-2015 11:08 PM
IROCtometal
TPI
3
09-09-2015 10:01 AM
89fast5oh
Exhaust
2
09-08-2015 09:55 AM
IROCtometal
TPI
0
09-02-2015 02:01 PM



Quick Reply: Rough Idle



All times are GMT -5. The time now is 05:34 PM.