Large Tube Runners
#2
Supreme Member
iTrader: (58)
Re: Large Tube Runners
You might have better luck on the Power Adder forum...
https://www.thirdgen.org/forums/power-adder/
Someone used to sell a set of large tube runners with the bosses for fogger nozzles already welded in. I've even seen a complete NOS kit on Ebay that supposedly came with the runners. They're out there, just not extremely common.
https://www.thirdgen.org/forums/power-adder/
Someone used to sell a set of large tube runners with the bosses for fogger nozzles already welded in. I've even seen a complete NOS kit on Ebay that supposedly came with the runners. They're out there, just not extremely common.
#3
Re: Large Tube Runners
You might have better luck on the Power Adder forum...
https://www.thirdgen.org/forums/power-adder/
Someone used to sell a set of large tube runners with the bosses for fogger nozzles already welded in. I've even seen a complete NOS kit on Ebay that supposedly came with the runners. They're out there, just not extremely common.
https://www.thirdgen.org/forums/power-adder/
Someone used to sell a set of large tube runners with the bosses for fogger nozzles already welded in. I've even seen a complete NOS kit on Ebay that supposedly came with the runners. They're out there, just not extremely common.
Do we know who exactly used to sell these runners?
I haven't had much luck in the Power Adder Forum...
Trending Topics
#15
Junior Member
Join Date: Mar 2012
Location: Quad Cities, IA
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Camaro IROC-Z 5.7 TPI
Engine: 350 aka 5.7L Tuned Port Injection
Transmission: 700-R4
Axle/Gears: 3.27 posi
Re: Large Tube Runners
im sure you could run nitrous on a first tpi setup. but you would need to fabricate runners or go the easy route with a nitrous plate. an ls1 plate would probably fit the first throttle body. if not one would be very cheap and easy to make.
#16
Supreme Member
Re: Large Tube Runners
You could get creative and have nozzle bungs welded into any set of runners. The photo in the swapper's guide looks like someone did just that with a set of LTRs from TPIS. Take a look at the things that 1989GTATransAm is doing. He's definitely not afraid to get creative.
#17
Junior Member
Join Date: Mar 2012
Location: Quad Cities, IA
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Camaro IROC-Z 5.7 TPI
Engine: 350 aka 5.7L Tuned Port Injection
Transmission: 700-R4
Axle/Gears: 3.27 posi
Re: Large Tube Runners
Do you believe that welding the runners would be more effective than a plate?
#18
Supreme Member
iTrader: (20)
Re: Large Tube Runners
It would surely be more effective at distribution of nitrous and fuel, always a good thing to be sure of. But plate systems work well too and would be cheaper to do. Nitrous nozzles add up quickly 50-80 bucks a wet nozzle, 8 nozzles + all the lines and distribution blocks....
Thread
Thread Starter
Forum
Replies
Last Post
88SS6SPEED
Engine/Drivetrain/Suspension Parts for Sale
7
11-11-2015 07:05 AM
Chas91Z28
Engine/Drivetrain/Suspension Wanted
10
10-22-2015 10:12 AM
toronto formula
Engine/Drivetrain/Suspension Parts for Sale
3
09-10-2015 07:31 AM