tbi to tpi swap confusion
#1
Junior Member
Thread Starter
Join Date: Feb 2008
Location: SOCAL
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Car: 06 Silverado, 05 G6, 92 CAMARO RS
Engine: 305
Transmission: 700R4
Axle/Gears: 2.73
tbi to tpi swap confusion
I keep reading on here about the wiring harness. I have a 1992 tbi 305. I am currently looking for a tpi setup on ebay. Now do I need a new wiring harness for this or will my factory harness work. I think I need a new ECM, is this correct? I know I will be looking for an 87 on up tpi setup. Could anyone let me know if I need the whole harness from a tpi setup or if I can use my factory harness. Also if I need a harness, will I need the year of the tpi setup harness or the 1992 tpi harness? What about gauges and so on also?
Thanks for your knowledge.
Mark
Thanks for your knowledge.
Mark
#2
Moderator
iTrader: (1)
Re: tbi to tpi swap confusion
Did you read the tech article on this website about changing from TBI to TPI? Not to mention the several other threads from members who have done this swap?
Yes you need a 90-92 TPI computer. You can use your existing harness if you change the wires around as described in the tech article and the threads. That would be the best option, because of the complexity of a '92 harness. The gauges will work the same because the sensors are almost identical.
Yes you need a 90-92 TPI computer. You can use your existing harness if you change the wires around as described in the tech article and the threads. That would be the best option, because of the complexity of a '92 harness. The gauges will work the same because the sensors are almost identical.
Thread
Thread Starter
Forum
Replies
Last Post
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
08-12-2015 03:41 PM