Cold start injector Ohms
04-13-2006, 07:52 PM
#1
Member
Thread Starter
Join Date: Jul 2003
Location: CANTON, OHIO
Posts: 239
Likes: 0
Received 35 Likes
on
12 Posts
Car: 87 T/A
Engine: 305 TPI
Transmission: 700R4
Cold start injector Ohms
Anybody know what I should have for cold start injector ohms? I checked it & I get 4.1 Ohms. Is this good or should it read higher like the other 8, I got 16.5 to 17 on those. 87 305 TPI.
04-27-2006, 08:40 AM
#3
Member
Thread Starter
Join Date: Jul 2003
Location: CANTON, OHIO
Posts: 239
Likes: 0
Received 35 Likes
on
12 Posts
Car: 87 T/A
Engine: 305 TPI
Transmission: 700R4
Thanks I talked to rich at cruzin performance & he said it sounds like the injectors might be leaking> I will get a fuel pressure guage & check leakdown als will buy node light to check if injectors getting signal. The car runs after hard start but I want to see if injectors are firing as soon as I try to start the car. I will also check to see if plugs are firing right away. I want to make sure it's not something simple like a sensor (cts) or a relay. I will also check for gas in the fuel regulator. I hope this will cover all the bases!!!
04-29-2006, 08:54 PM
#4
Member
Thread Starter
Join Date: Jul 2003
Location: CANTON, OHIO
Posts: 239
Likes: 0
Received 35 Likes
on
12 Posts
Car: 87 T/A
Engine: 305 TPI
Transmission: 700R4
Thanks for the help. Worked on it yesterday and am pretty sure cold start sensor is messed up. Starts fine if cold start is disabled. Will replace sensor & hope that it was that easy!!!!
Thread
Thread Starter
Forum
Replies
Last Post
nhra-trans-am
Southern California Area
14
09-17-2015 10:16 PM
