High idle at startup
#1
Supreme Member
Thread Starter
High idle at startup
I have a high idle at startup that goes anywhere from 2K-25K, and then gradually down to where it belongs. Happens every single time since I put all the TPI back together. I've triple checked all the vacuum lines and even replaced some that I thought may be the problem. Any other suggestions? IAC reset?
If so, lemme make sure I have the process straight. Put paper clip in A&B, turn key to ON for 30 seconds. Then disconnect IAC (with key still on?), then start the car (paper clip still in?). Then kill it and hook the IAC connector back up.
If so, lemme make sure I have the process straight. Put paper clip in A&B, turn key to ON for 30 seconds. Then disconnect IAC (with key still on?), then start the car (paper clip still in?). Then kill it and hook the IAC connector back up.
#2
Member
Join Date: Apr 2002
Location: Columbus,Cleveland
Posts: 439
Likes: 0
Received 0 Likes
on
0 Posts
Insert paper clip, turn ignition on but do not start car, should hear fan running, wait 30 seconds, disconnect IAC, turn ignition off, remove paper clip, start car, adjust idle screw These are the steps as best as i can remember. -John
Thread
Thread Starter
Forum
Replies
Last Post