1982 race car build at schmitt tuning
#1
Junior Member
Thread Starter
Join Date: Feb 2005
Location: richmond hill ontario
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Transmission: 2000 t56
Axle/Gears: 8.8 hybrid/moser/tru trac/4.11s
1982 race car build at schmitt tuning
newest build at schmitt tuning is this 1982 chevrolet camaro.
it is going to be built to scca spec to run gt2 or gt3 at regional events.
car is already fitted with roll cage.
budget is super tight for this build so the plan is to fabricate as much as possible while leaving the
available moneys for tires, suspension and brakes.
the car will get an ls1 t56 combo, ls1 front and rear brakes
and a ton of aerodynamic mods.
the idea is to maximize aerodynamic efficiency of the car.
the mods include:front adjustable splitter and rear diffuser. addition of skirts to the factory units, rear wing, and side vents for front and rear wheel wells.
if the budget allows, i would also like to replace all the glass with lexan for its light weight characteristics.
the drivetrain will be relocated 8-10 inches rearward and 2 inches lower for better weight distribution and overall balance.
this will also allow for more room in the front of the engine to redesign and build a better air damn for the radiator and coolers aswell as creating an exit for the air through the
hood.
the deadline is april of 2013. so progress hopefully will be speedy!
the fab has begun.
it is going to be built to scca spec to run gt2 or gt3 at regional events.
car is already fitted with roll cage.
budget is super tight for this build so the plan is to fabricate as much as possible while leaving the
available moneys for tires, suspension and brakes.
the car will get an ls1 t56 combo, ls1 front and rear brakes
and a ton of aerodynamic mods.
the idea is to maximize aerodynamic efficiency of the car.
the mods include:front adjustable splitter and rear diffuser. addition of skirts to the factory units, rear wing, and side vents for front and rear wheel wells.
if the budget allows, i would also like to replace all the glass with lexan for its light weight characteristics.
the drivetrain will be relocated 8-10 inches rearward and 2 inches lower for better weight distribution and overall balance.
this will also allow for more room in the front of the engine to redesign and build a better air damn for the radiator and coolers aswell as creating an exit for the air through the
hood.
the deadline is april of 2013. so progress hopefully will be speedy!
the fab has begun.
#2
Member
Re: 1982 race car build at schmitt tuning
very cool, keep us posted
Are you planning on a dry sump for the engine?
Are you planning on a dry sump for the engine?
#3
Member
Join Date: Apr 2008
Location: Schomberg Ontario Canada
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 IROC race car
Engine: 425/435 rwhp/tq
Transmission: WCT5 .80 5th gear
Axle/Gears: 3:42
Re: 1982 race car build at schmitt tuning
I have a mostly complete dry sump package off my 85 IROC. Needs a pan.
Also a set of wheels and 888 tires from the track.
Message me for info.
Also a set of wheels and 888 tires from the track.
Message me for info.
#4
Junior Member
Thread Starter
Join Date: Feb 2005
Location: richmond hill ontario
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Transmission: 2000 t56
Axle/Gears: 8.8 hybrid/moser/tru trac/4.11s
Re: 1982 race car build at schmitt tuning
it was a pleasure talking to you doug. thanks for the tires they are in great condition. hopefully we will talk again at test and tunes next year.
#5
Supreme Member
Join Date: Apr 2001
Location: Stouffville, Ontario
Posts: 1,715
Likes: 0
Received 0 Likes
on
0 Posts
Car: 83WS6TA
Engine: ZZ4
Transmission: TH350C
Axle/Gears: 3:23
Re: 1982 race car build at schmitt tuning
Be nice to see another thirdgen in GT next year.
I think there's some rule changes coming for 2013 but it might not effect sprints. May effect the challenge races and the 3 hour races though. Something to do with power/weight ratio and a bunch of classification crap - could be a PITA but now is the time to see if there's anything that might effect your build plans and head it off before it's a problem. Doug can explain more about it.
I think there's some rule changes coming for 2013 but it might not effect sprints. May effect the challenge races and the 3 hour races though. Something to do with power/weight ratio and a bunch of classification crap - could be a PITA but now is the time to see if there's anything that might effect your build plans and head it off before it's a problem. Doug can explain more about it.
Trending Topics
#8
Member
Join Date: Jan 2002
Location: Franklin, TN
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 B4C 1LE/2010 GT/2003 P71/2002 Z2
Engine: 5.7/4.6/4.6/5/7
Transmission: A4/A5/A4/A4
Axle/Gears: 3:23/3:73/3:23/3:73
Re: 1982 race car build at schmitt tuning
super nice!
#10
Member
Join Date: Apr 2008
Location: Schomberg Ontario Canada
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 IROC race car
Engine: 425/435 rwhp/tq
Transmission: WCT5 .80 5th gear
Axle/Gears: 3:42
Re: 1982 race car build at schmitt tuning
nice wheels. My containment seat arrives in 2 weeks. You should have a look at it.
#11
Junior Member
Thread Starter
Join Date: Feb 2005
Location: richmond hill ontario
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Transmission: 2000 t56
Axle/Gears: 8.8 hybrid/moser/tru trac/4.11s
Re: 1982 race car build at schmitt tuning
How u think it would look in my car....
I picked up those koni yellows. Excellent tip, thanks again.
I picked up those koni yellows. Excellent tip, thanks again.
#12
Member
Join Date: Apr 2008
Location: Schomberg Ontario Canada
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 IROC race car
Engine: 425/435 rwhp/tq
Transmission: WCT5 .80 5th gear
Axle/Gears: 3:42
Re: 1982 race car build at schmitt tuning
I can bring it down to test fit. Can't beat the price and added safety.
I will be selling my Kirkey Deluxe once it is installed.
I will be selling my Kirkey Deluxe once it is installed.
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
06-13-2021 01:13 PM