Aftermarket Fuel Tank
03-03-2024, 09:53 AM
#1
Junior Member
Thread Starter
Join Date: Jun 2023
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Aftermarket Fuel Tank
Question. I replaced my fuel tank on an 85 IROC with a Ricks Tanks.
It did not come with a filler neck attached to the tank. As most are aware of the stock tank has a ridged filler neck built into the tank so no upper support is needed.
Does anyone know of an aftermarket filler neck that can be attached to the Ricks Tanks fuel tank, fit to the factory fuel door opening, and have a support mounting mechanism up top?
It did not come with a filler neck attached to the tank. As most are aware of the stock tank has a ridged filler neck built into the tank so no upper support is needed.
Does anyone know of an aftermarket filler neck that can be attached to the Ricks Tanks fuel tank, fit to the factory fuel door opening, and have a support mounting mechanism up top?
03-03-2024, 06:21 PM
#2
03-06-2024, 08:06 AM
#3
Junior Member
Thread Starter
Join Date: Jun 2023
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Re: Aftermarket Fuel Tank
Looks like I am going to have to fabricate a mount to hold the upper neck up and stable while filling anyway. Limited access but even the Ricks tanks website states to use your stock filler neck. The problem is that stock filler neck on an 85 was soldered into the tank so not coming out without some risk.
Ill have to look at the 4th gen and see if the angles are right.
Ill have to look at the 4th gen and see if the angles are right.
Thread
Thread Starter
Forum
Replies
Last Post