injector selection help
10-04-2018, 08:41 PM
#1
Junior Member
Thread Starter
Join Date: Apr 2018
Location: Nsw australia
Posts: 33
Received 0 Likes
on
0 Posts
Car: 1992 z28
Engine: 305 tpi
Transmission: Auto
injector selection help
Hey.
I Have had heaps of help on here so far so ill try my luck again.
Im putting together a new engine for my 92 camaro, its a crate zz6 with a first tpi intake and probably the ebl p4 ecm. I need to get some injectors for it and im looking at these.
Accel PART# 150830 14.5 ohm injectors. My question is will they work considering the stock ones were 16 ohms?
thanks in advance
I Have had heaps of help on here so far so ill try my luck again.
Im putting together a new engine for my 92 camaro, its a crate zz6 with a first tpi intake and probably the ebl p4 ecm. I need to get some injectors for it and im looking at these.
Accel PART# 150830 14.5 ohm injectors. My question is will they work considering the stock ones were 16 ohms?
thanks in advance
10-05-2018, 09:47 PM
#4
Re: injector selection help
since you need to tune for the injectors, this is another good choice. You would need to check with soothsay to see if the adapters are needed for first installation.
https://www.southbayfuelinjectors.co...brand_brand=19
https://www.southbayfuelinjectors.co...brand_brand=19
Thread
Thread Starter
Forum
Replies
Last Post
85z28kid
Engine Swap
35
06-12-2011 07:35 AM