CANISTER CONTROL VALVE
#1
Supreme Member
Thread Starter
Join Date: Nov 2011
Location: CT
Posts: 2,753
Received 259 Likes
on
150 Posts
Car: 1984 Chevrolet Camaro Z28
Engine: 5.0 Liter 4-BBL V8 High Output
Transmission: 5-Speed Manual
Axle/Gears: 3.73
CANISTER CONTROL VALVE
Just Curious Has Anyone Ever Seen This Valve Mounted To A Bracket Like This,Of All The Third Gens Iv'e Seen I Never Have.All The One's Iv'e Seen Just Hang On The Emission Hoses Like Mine Pictured. From The Drawing It Looks Like This Bracket Bolted To The Alternator Bracket.
#2
Supreme Member
iTrader: (1)
Join Date: Sep 2005
Posts: 26,113
Received 1,687 Likes
on
1,282 Posts
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: CANISTER CONTROL VALVE
Never seen a bracket either; but the valves all have the 2 screw holes anyway.
#3
Junior Member
Re: CANISTER CONTROL VALVE
I would like to acquire the same bracket for my 1984 Z28 LG4 305. Mine is also laying loose on the intake manifold. I assume I’ll have to replace the current hoses to get it to reach wherever it belongs. Does it mount on the alternator bracket? Where can I get this CCV bracket? Thanks!
#5
Supreme Member
Join Date: Jun 2015
Location: Austin, TX
Posts: 1,911
Received 176 Likes
on
135 Posts
Car: 90 Formula / T-tops
Engine: 305 TPI
Transmission: MD8
Re: CANISTER CONTROL VALVE
The 4th gen do this. https://www.thirdgen.org/forums/tech...ter-purge.html
Thread
Thread Starter
Forum
Replies
Last Post