what did you do to your thirdgen today?
#1
Senior Member
Thread Starter
what did you do to your thirdgen today?
i continued to battle with my heater core installation. I lost the battle today but the war goes on. I just received a new to me front ground effect that has some cracks in it. I put some epoxy on them. I found a plug on my throttle body that was unplugged and have no idea what it is. it was a busy day.
#2
Supreme Member
iTrader: (1)
Join Date: Feb 2017
Location: Meriden, CT 06450
Posts: 4,033
Received 514 Likes
on
430 Posts
Car: 84 TA orig. 305 LG4 "H" E4ME
Engine: 334 SBC - stroked 305 M4ME Q-Jet
Transmission: upgraded 700R4 3200 stall
Axle/Gears: 10bolt 4.10 Posi w Lakewood TA Bars
Re: what did you do to your thirdgen today?
#4
Supreme Member
Re: what did you do to your thirdgen today?
Worked on making patterns do I can recover the steering wheel and shifter boot.
#5
Senior Member
Thread Starter
#6
Supreme Member
Re: what did you do to your thirdgen today?
Well I'm going to try to do my own recover... starting off with vinyl and then figured if I can get it down I might start offering a service, but who knows. Was only going to do the shifter boot but my wheel is shot and I can't get anyone local to do it for a fair price.
#7
Senior Member
Thread Starter
Re: what did you do to your thirdgen today?
ordered this new I.a.c plug. once it arrives I will solder it in place of the broken one I have now.
Trending Topics
The following users liked this post:
Bts1980 (01-07-2023)
#9
Senior Member
Thread Starter
Re: what did you do to your thirdgen today?
I will look into it. as it sits the plastic case is broken. the lock isn't there and the 4 plastic tubes are missing. there are just 4 bare wires sticking out.
#10
Senior Member
Thread Starter
Re: what did you do to your thirdgen today?
last night after dinner I decided to take a quick drive around the block. I wasn't going to drive it until I got the heater core back in but I couldn't help burning the tires around a few corners. I like this car.
#11
Senior Member
Thread Starter
Re: what did you do to your thirdgen today?
it that way. ive always cut and soldered.
#12
Supreme Member
Join Date: May 2015
Location: Florida
Posts: 1,712
Received 241 Likes
on
186 Posts
Car: 1991 Z28
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3:42 Auburn
Re: what did you do to your thirdgen today?
Finished putting my wiper blade arms back on. Had the windshield replaced and had them leave the arms off to repaint and replace the hose.
#15
Junior Member
Join Date: Nov 2009
Location: Bryan, Texas
Posts: 40
Received 0 Likes
on
0 Posts
Car: 83 Pontiac Trans AM
Engine: 305 CFI
Transmission: 700R4
Re: what did you do to your thirdgen today?
Replaced two sidemarker lights. Hope to figure out my wiper motor wiring this weekend.
#16
Member
Join Date: Nov 2016
Location: Florida
Posts: 348
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro Sport Coupe
Engine: The All-Powerful 2.8l!! :P
Re: what did you do to your thirdgen today?
Took her for her maiden voyage! Besides a sticky throttle, vacuum leak and smoke from a coolant hose leak that decided to spring up she putted right along at a constant 30 MPH (because that's where the throttle was sticking! ) All of the above is getting sorted out starting first thing tomorrow
#17
Senior Member
Thread Starter
Re: what did you do to your thirdgen today?
congrats liveit! nothing like the first drive. when you finally make something immobile mobile its like mechanical magic. doesn't sound like your too far away from having it squared away.
#19
Supreme Member
iTrader: (1)
Join Date: Feb 2017
Location: Meriden, CT 06450
Posts: 4,033
Received 514 Likes
on
430 Posts
Car: 84 TA orig. 305 LG4 "H" E4ME
Engine: 334 SBC - stroked 305 M4ME Q-Jet
Transmission: upgraded 700R4 3200 stall
Axle/Gears: 10bolt 4.10 Posi w Lakewood TA Bars
Re: what did you do to your thirdgen today?
Took her for her maiden voyage! Besides a sticky throttle, vacuum leak and smoke from a coolant hose leak that decided to spring up she putted right along at a constant 30 MPH (because that's where the throttle was sticking! ) All of the above is getting sorted out starting first thing tomorrow
Did you get the adrenaline rush? I think it might be gone for me. We will see. I hope not.
#20
Supreme Member
Re: what did you do to your thirdgen today?
I hear you on that. It's been four, going on five, years since mine last ran and I'm on the home stretch. If it doesn't start I'll probably cry lol!
#21
Supreme Member
iTrader: (3)
Re: what did you do to your thirdgen today?
Replaced a bad e brake cable, replaced the fuel filter, and started doing the AN fittings for the adjustable fuel regulator but hit a brick wall since I cant cut the braided stainless line without a special cutting tool. I tried taping and using a cut off wheel but it causes the braids to flare out. Hopefully the one I ordered from Summit will be here tomorrow
#23
Senior Member
Thread Starter
Re: what did you do to your thirdgen today?
I guess I did know how to remove the terminals. I did that on a relay.
#24
Senior Member
Re: what did you do to your thirdgen today?
I got to work early and just kept staring at mine lol. I'm actually working on refinishing another set of front wheels to put on the rear so I have the same offset front and rear.
The following 2 users liked this post by Jbuchanan:
82firebirdlove (04-22-2021), KR81 (12-22-2020)
#25
Senior Member
Thread Starter
Re: what did you do to your thirdgen today?
#26
Senior Member
Re: what did you do to your thirdgen today?
Not necessarily. GTA wheels have different offset front and rear. The wheels are actually stamped front or rear. If you look closely the front look deeper so I bought another set so I can run 4 of the same. Looks better to me and rotation won't be an issue.
#31
Senior Member
Thread Starter
#32
Senior Member
Thread Starter
#33
Senior Member
Thread Starter
#34
Member
Join Date: Nov 2016
Location: Florida
Posts: 348
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro Sport Coupe
Engine: The All-Powerful 2.8l!! :P
Re: what did you do to your thirdgen today?
She had a bit of a temper tantrum waiting in the drive thru line yesterday so next order of business is fixing the hacked up fan relay. Best of luck to both u guys on getting ur cars going!!
#36
Senior Member
Thread Starter
#38
Junior Member
Join Date: Jul 2017
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 camaro iroc z
Engine: 305
Transmission: 700r4
Re: what did you do to your thirdgen today?
Dealing with all the gremlins of a free car given to me. Speedo/odometer, cruise don't work, waiting to get underneath to find the coolant sender wire that suppost to be hooked up for temp guage,fixed some vacuum issues.plugs, wires cap and rotor are done yay I stomped on it to get across the street and it did nothing lol. Had to back off the throttle to let it catch up. Oh the headache
#39
Senior Member
Thread Starter
Re: what did you do to your thirdgen today?
finished the new heater core install. have all heat and a/c functions now. next are replacing a bad IAC plug on the tbi and fixing the non functioning hi-beam switch. both should be easy and satisfying. anything's gonna feel quick and easy after the heater core.
#40
Supreme Member
iTrader: (3)
Re: what did you do to your thirdgen today?
Dealing with all the gremlins of a free car given to me. Speedo/odometer, cruise don't work, waiting to get underneath to find the coolant sender wire that suppost to be hooked up for temp guage,fixed some vacuum issues.plugs, wires cap and rotor are done yay I stomped on it to get across the street and it did nothing lol. Had to back off the throttle to let it catch up. Oh the headache
#41
Junior Member
Join Date: Jul 2017
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 camaro iroc z
Engine: 305
Transmission: 700r4
Re: what did you do to your thirdgen today?
Awesome thanks, I'll be on the look out for it tomorrow. I just figured it was bundled in with the wire attaching to the oxygen sensor.
#43
Senior Member
Thread Starter
Re: what did you do to your thirdgen today?
drove 40 miles to work today. it was the first real drive after installing the heater core. I parked and as I walked into work I looked back and saw a puddle under the car. my heart sank thinking the heater core or hoses were leaking. I walked back over to see it was just a/c condensation. ear to ear grin!
#44
Senior Member
Thread Starter
Re: what did you do to your thirdgen today?
had to add a little coolant to mine today. I'm not sure whats going on. it runs cool but every two or three days of driving if I check the coolant its down several inches. I haven't seen any leaks but its consistently a few inches down. i cant imagine where the coolants going.when you look into your radiator where does the coolant level sit?
#45
Supreme Member
iTrader: (3)
Re: what did you do to your thirdgen today?
had to add a little coolant to mine today. I'm not sure whats going on. it runs cool but every two or three days of driving if I check the coolant its down several inches. I haven't seen any leaks but its consistently a few inches down. i cant imagine where the coolants going.when you look into your radiator where does the coolant level sit?
#47
Member
Join Date: Nov 2016
Location: Florida
Posts: 348
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro Sport Coupe
Engine: The All-Powerful 2.8l!! :P
Re: what did you do to your thirdgen today?
took off the hood and fender for repair after that spill with that Honda got it pretty much squared away but have more work to do tomorrow
#48
Senior Member
Thread Starter
Re: what did you do to your thirdgen today?
I bought n oem front ground effect off of craigslist. I got a great deal but of course it didn't come with hardware. I asked the forum where I could find the correct size for the bolts. I got a few vague answers but I really wanted someone to just give me the answer. I decided I would take the car to the hardware store and run in and out with bolts until I fond the correct ones. I happened to be on my back under the car when I noticed to my great luck there were still a few bolts attached from where the old ground effect broke off. today I removed them and the remaining broken fragments of the old effect and went to the hardware store to purchase bolts. tomorrow I will install the ground effect with the bolts and double sided tape across the top just as they did in the factory.
#49
Member
Join Date: Nov 2016
Location: Florida
Posts: 348
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro Sport Coupe
Engine: The All-Powerful 2.8l!! :P
Re: what did you do to your thirdgen today?
Reinstalled my repaired fender, beat a dent out of the hood and put 22 stitches in the front end. she'll get around and have some fun but so much for going to that car show in the morning
#50
Supreme Member
Join Date: May 2015
Location: Florida
Posts: 1,712
Received 241 Likes
on
186 Posts
Car: 1991 Z28
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3:42 Auburn
Re: what did you do to your thirdgen today?
Gonna tackle the pass side valve cover today, Did the drivers side the other night. worried a little about getting the new one on, That big thick wire loom that runs along the runners made just removing the old one a little tricky.