Info on porting miniram 2 runners?
01-21-2016, 08:27 PM
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: May 2012
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Info on porting miniram 2 runners?
Just some curiosity, but I've got my engine running and I'm wanting the absolute best out of it.
I feel like there is a ton of meat left in the runners even though I have the 1206 version of the miniram 2. Afr 210's seem just visually to have bigger runners than the miniram's which is not ideal for a clear air stream. Anyone have any experience with this or have any good articles that aren't generic "smooth all the bumps and match to intake manifold".
engine:
383 with 210cc AFR heads. Cam is pretty aggressive with solid roller lifters producing ~.625 gross lift. Engine can spin to 7k because it is a road racing application. Static compression just under 11:1 but cam has enough overlap to run pump gas.
I feel like there is a ton of meat left in the runners even though I have the 1206 version of the miniram 2. Afr 210's seem just visually to have bigger runners than the miniram's which is not ideal for a clear air stream. Anyone have any experience with this or have any good articles that aren't generic "smooth all the bumps and match to intake manifold".
engine:
383 with 210cc AFR heads. Cam is pretty aggressive with solid roller lifters producing ~.625 gross lift. Engine can spin to 7k because it is a road racing application. Static compression just under 11:1 but cam has enough overlap to run pump gas.
Thread
Thread Starter
Forum
Replies
Last Post
NowhereFast
TPI
2
01-19-2016 11:55 AM