What springs with Crane 2032?
09-24-2014, 02:49 PM
#1
Senior Member
Thread Starter
Join Date: Feb 2011
Location: Long Island, NY
Posts: 653
Likes: 0
Received 4 Likes
on
3 Posts
Car: 87 Trans Am, 99 WS6, 16 Mustang GT
Engine: LB9, LS1
Transmission: 700R4, T56
Axle/Gears: 3.42 Posi, 4.10 Posi
What springs with Crane 2032?
The recommended springs are part no. 98602. They cost $160, and that's ONLY for the springs. I called Summit and the guy reccomended this kit. I'm just looking for a drop in replacement, without having to play with shims or spring pockets.
09-24-2014, 03:09 PM
#2
Re: What springs with Crane 2032?
That should work.
What brand is the 98602? I cant find info
Edit, you mean crane 96802? Similar seat pressure at higher height but they have higher spring rate i like on hydraulic rollers. That cam is mild enough it should be ok with what you have in the summit kit
What brand is the 98602? I cant find info
Edit, you mean crane 96802? Similar seat pressure at higher height but they have higher spring rate i like on hydraulic rollers. That cam is mild enough it should be ok with what you have in the summit kit
Last edited by Orr89RocZ; 09-24-2014 at 03:15 PM.
11-02-2014, 11:29 PM
#4
Supreme Member
iTrader: (13)
Join Date: Dec 2002
Location: Bowdon, GA.
Posts: 2,535
Likes: 0
Received 16 Likes
on
14 Posts
Car: 1988 Camaro
Engine: 355, 10.34:1, 249/252 @.050", IK200
Transmission: TH-400, 3500 stall 9.5" converter
Axle/Gears: Ford 9", detroit locker, 3.89 gears
Re: What springs with Crane 2032?
Do you need seals, locks and retainers too like that kit has? Or do you just need the springs?
Either one of these will work, both $30. I have used Howards springs for 10 years. In fact have used these 2 on many diff engines over that 10 year span.
Here's the correct links
http://www.competitionproducts.com/H.../#.VFchRPnF9QE
http://www.competitionproducts.com/H.../#.VFchcPnF9QE
Here's the common umbrella seals $3 http://www.competitionproducts.com/V.../#.VFchsvnF9QE
PC type seals $16 http://www.competitionproducts.com/P.../#.VFch6fnF9QE
Either one of these will work, both $30. I have used Howards springs for 10 years. In fact have used these 2 on many diff engines over that 10 year span.
Here's the correct links
http://www.competitionproducts.com/H.../#.VFchRPnF9QE
http://www.competitionproducts.com/H.../#.VFchcPnF9QE
Here's the common umbrella seals $3 http://www.competitionproducts.com/V.../#.VFchsvnF9QE
PC type seals $16 http://www.competitionproducts.com/P.../#.VFch6fnF9QE
Last edited by Night rider327; 11-03-2014 at 12:35 AM.
11-03-2014, 12:35 AM
#6
Supreme Member
iTrader: (13)
Join Date: Dec 2002
Location: Bowdon, GA.
Posts: 2,535
Likes: 0
Received 16 Likes
on
14 Posts
Car: 1988 Camaro
Engine: 355, 10.34:1, 249/252 @.050", IK200
Transmission: TH-400, 3500 stall 9.5" converter
Axle/Gears: Ford 9", detroit locker, 3.89 gears
Re: What springs with Crane 2032?
Ok I edited post with links that work
02-24-2015, 01:43 PM
#7
Re: What springs with Crane 2032?
Ended up just getting these the other week from a seller on here, new in box along with seals for a good price.
http://www.summitracing.com/parts/cca-981-16/overview/
Single, 1.254 in. Outside Diameter, 370 lbs./in. Rate, 1.150 in. Coil Bind Height
http://www.summitracing.com/parts/cca-981-16/overview/
Single, 1.254 in. Outside Diameter, 370 lbs./in. Rate, 1.150 in. Coil Bind Height
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
7
10-08-2015 08:34 PM