installing new injectors- gasket and egr question
#1
Senior Member
Thread Starter
iTrader: (3)
Join Date: Jan 2012
Location: Clark NJ
Posts: 877
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1988 Pontiac Transam GTA Notchback
Engine: 2003 Chevy 5.3 Vortec (325 cu)
Transmission: 4L60E
Axle/Gears: 3.27
installing new injectors- gasket and egr question
So I just bought new Bosch III injectors from Southbay for my L98 TPI b/c my stock ones leak. Well anyway I need gaskets so I am getting Felpro MS93035-1. My dad brought up an interesting point, will the egr valve cause a problem of any kind depending on whether it is positive or negative backpressure with this gasket, or does one have nothing to do with the other?
I figured I would ask, can't hurt right, lol. I am not mr. goodwrench but I kinda know my way around this engine.
I figured I would ask, can't hurt right, lol. I am not mr. goodwrench but I kinda know my way around this engine.
#2
Re: installing new injectors- gasket and egr question
If the EGR gasket matches the base of the valve and the openings of the intake, there should be no problems regardless of the valve type.
#3
Senior Member
Thread Starter
iTrader: (3)
Join Date: Jan 2012
Location: Clark NJ
Posts: 877
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1988 Pontiac Transam GTA Notchback
Engine: 2003 Chevy 5.3 Vortec (325 cu)
Transmission: 4L60E
Axle/Gears: 3.27
Re: installing new injectors- gasket and egr question
Okay thanks, and thanks for taking the time to answer.
Thread
Thread Starter
Forum
Replies
Last Post
NinjaNife
Tech / General Engine
27
08-23-2015 11:49 AM