irishhockey34

iTrader: (12)

I've got a 1992 RS with a 700R4 that im looking to recalibrate speedo gears in. My question is 1992 the first year for the 700R4 to use a speed sensor that works on pulses from the output shaft vs. a traditional gear setup? Trying to sort this out so I order the right parts

red rock

iTrader: (2)

http://www.transmissioncenter.net/sp...n_______va.htm

Tuned Performance

iTrader: (92)

The drive and driven gears are getting hard too find for the 700r4 . dakota digital sgi-5 is a alternative.

irishhockey34

iTrader: (12)

I'm aware of this site, I'm trying to figure out which VSS that I have on my car as there are numerous styles that came on the 700R4, and I believe 1992 got the pulse driven sensor, which is my question.

Tuned Performance

iTrader: (92)

tbi 2k vss to a vss buffer , tpi 2k vss maf to a buffer tpi sd 4k to the ecm

red rock

iTrader: (2)

Sorry, thought you wanted to recalibrate your gears. 4 pulse, probably.This sensor puts out 4 pulses per turn. A four pulse sine-wave (A.C. current or alternating current) signal is required by the 1990-1993 TPI, 1992-1993 LT1 engines and 1990-1993 Camaro 3.1 / 3.4 V6 engines

irishhockey34

iTrader: (12)

So how do I recalibrate my 2k vss and vss buffer for different rear-end gears?

Tuned Performance

iTrader: (92)

http://www.summitracing.com/parts/DAK-SGI-5/

irishhockey34

iTrader: (12)

Thanks!