To much timing?
04-15-2012, 12:02 AM
#1
Member
Thread Starter
Join Date: Sep 2011
Location: North Iowa
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Trans Am
Engine: 5.7 Liter V8
Transmission: Auto 700R4
Axle/Gears: Stock
To much timing?
Recently had my quadrajet rebuilt with one of Cliffs kit and I took the car in to get a few things checked out once it got put on since it wasn't running 100%. When I picked the car up they said the timing was way off and that they retarded the timing 10 degrees. It runs alright, but doesnt like to idle to well while the choke is going and like to hesitate every so often after 65mph. Fuel pressure is where it needs to be so I know thats good. I'm wondering if the timing is just to far off? Also, I'm not sure if its the cam but the car shakes some while its idling to. Its a mechanical/vacuum advance disty
84 Trans Am
72 camaro 350 bored over .60
Keith Black Flattop Pistons
Edelbrock performer plus cam
305 HO Heads (59cc)
10:1 Compression
84 Trans Am
72 camaro 350 bored over .60
Keith Black Flattop Pistons
Edelbrock performer plus cam
305 HO Heads (59cc)
10:1 Compression
Last edited by JLCustomizing; 04-15-2012 at 12:11 AM.
Thread
Thread Starter
Forum
Replies
Last Post