how hard to intall and were to buy. factory fuel lines.
#1
Supreme Member
Thread Starter
Join Date: Dec 2004
Location: chicago IL
Posts: 1,204
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 formula
Engine: 350 tuned port. bolt ons
Transmission: 700r4
Axle/Gears: 3.73
how hard to intall and were to buy. factory fuel lines.
My fuel filter is rounded off and the filter hex nuts are striped. I need to replace the lines. now Im wondering how hard of a job is this? do you guys know of anyplace that carry fuel lines for a 91 formula firebird? do they come pre bent and ready to install? i know of one place class industries. Its really ashame that i have to do this. I would just cut the filter off and use fuel injection hose with a diffrent fuel filter but I want to do this job the right way and do the fuel line. I did not get under my formula to see were the fuel line connect to. I would need 2 diffrent lines right?
#2
Supreme Member
iTrader: (4)
Join Date: Mar 2009
Location: Pepperell, MA
Posts: 3,079
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1987 Trans Am
Engine: LQ9/L92
Transmission: 4L60E
Re: how hard to intall and were to buy. factory fuel lines.
finelines and thirdgen ranch are 2 off the top of my head that offer the lines prebent. there are 2 main lines that run on these cars; the larger of the two is the feed, the other is return. changing them out is pretty easy, just need to undo all the clamps that hold them in place (i think you also need to remove the trans crossmember, but its been a while).
#3
Re: how hard to intall and were to buy. factory fuel lines.
You can get one of these dorman repair kits at most parts stores, you'll probably need to get a bender to make the tight bends.
#4
Former Sponsor
iTrader: (5)
Re: how hard to intall and were to buy. factory fuel lines.
Abe, we can get pre-bent lines for your car. We don't have the TPI lines on our site yet because I'm working with our supplier to change what's included with the kits but we do have them. We can get them in regular steel or stainless. We use the best supplier in the industry and the lines will be bent perfectly.
#5
Supreme Member
Thread Starter
Join Date: Dec 2004
Location: chicago IL
Posts: 1,204
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 formula
Engine: 350 tuned port. bolt ons
Transmission: 700r4
Axle/Gears: 3.73
Re: how hard to intall and were to buy. factory fuel lines.
Abe, we can get pre-bent lines for your car. We don't have the TPI lines on our site yet because I'm working with our supplier to change what's included with the kits but we do have them. We can get them in regular steel or stainless. We use the best supplier in the industry and the lines will be bent perfectly.
Thread
Thread Starter
Forum
Replies
Last Post
AkDrifted
Engine/Drivetrain/Suspension Parts for Sale
6
08-17-2015 07:45 PM
92camaroJoe
Tech / General Engine
6
08-13-2015 06:07 AM