NEED TO KNOW SPECS
#1
Member
Thread Starter
Join Date: Aug 2009
Location: Chicagoland south suburbs
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 Z28
Engine: 350
Transmission: Turbo 200C
Axle/Gears: 3.43
NEED TO KNOW SPECS
i have an 82 Camaro 305 crossfire. i need to know what piston size to get. i am going to be going through the entire car and dont know what the bore size is
#2
Member
Join Date: Apr 2008
Location: Minnesnowta
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Camaro Z28
Engine: 355ci, XE262 , 650dp
Transmission: T-5, RAM clutch
Axle/Gears: 3.23 limited slip
Re: NEED TO KNOW SPECS
What's prompting the rebuild?
Are you rebuilding the engine yourself?
Why rebuild your 305?
The proper procedure would be to have the block machined. That would determine your piston size. For example: if your cylinders needed .010 removed to make them round again, you would get .010 oversized pistons.
Are you rebuilding the engine yourself?
Why rebuild your 305?
The proper procedure would be to have the block machined. That would determine your piston size. For example: if your cylinders needed .010 removed to make them round again, you would get .010 oversized pistons.
#3
Member
Thread Starter
Join Date: Aug 2009
Location: Chicagoland south suburbs
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 Z28
Engine: 350
Transmission: Turbo 200C
Axle/Gears: 3.43
Re: NEED TO KNOW SPECS
The car needs to be gone through so I'm going to beef it up a bit new pistons, cam, litters, rockers etc. I had already put headers and an exhaust on it but I'm going to pull the engine and go through it.
Thread
Thread Starter
Forum
Replies
Last Post
TX-SleeperC5
Engine/Drivetrain/Suspension Parts for Sale
1
09-24-2015 03:13 PM