How not to keep your rocker arm nuts from getting loose
#1
Member
Thread Starter
iTrader: (2)
Join Date: Jan 2010
Location: Carrollton Texas.
Posts: 446
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Camaro Z28
Engine: 305 mild build up
Transmission: 700r4
Axle/Gears: Stock
How not to keep your rocker arm nuts from getting loose
I have seen many really stupid thing done to cars as has many of you. But I never recal seeing the rocker nuts welded to the studs berfore.
Here I was just starting to replace the valve seals to stop the smoking when out of the blue WHAM a kick in the ....well you know.
Here is a photo of what I ran right into. Who ever worked on this before I got it was a TOTAL IDIOT, this guy desided to weld all 16 of them to the studs. And by weld I mean to the point I have no other opition but to pull them off. I am sorry the photo is a little blurry, but you will get the point.
Oh well I was thinking of getting a new set of heads, I might as well do that now, no telling what other damage I will see.
Here I was just starting to replace the valve seals to stop the smoking when out of the blue WHAM a kick in the ....well you know.
Here is a photo of what I ran right into. Who ever worked on this before I got it was a TOTAL IDIOT, this guy desided to weld all 16 of them to the studs. And by weld I mean to the point I have no other opition but to pull them off. I am sorry the photo is a little blurry, but you will get the point.
Oh well I was thinking of getting a new set of heads, I might as well do that now, no telling what other damage I will see.
#2
Member
Join Date: Nov 2007
Location: Holland, MI
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 camaro
Engine: 383 AFR heads
Transmission: 700R4
Axle/Gears: Ford 9" 3.70:1
Re: How not to keep your rocker arm nuts from getting loose
I don't know what your talking about, that's high performance
#3
Senior Member
iTrader: (2)
Join Date: Dec 2004
Location: Orlando,FL
Posts: 682
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 GTA Trans Am
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: Borg Warner 9-Bolt 3.27
Re: How not to keep your rocker arm nuts from getting loose
Nonsense. Those are the special edition.
#4
Member
Thread Starter
iTrader: (2)
Join Date: Jan 2010
Location: Carrollton Texas.
Posts: 446
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Camaro Z28
Engine: 305 mild build up
Transmission: 700r4
Axle/Gears: Stock
Re: How not to keep your rocker arm nuts from getting loose
I think I got luck on this one. The nuts are coming off, And the camaro club I am in one of the other members just gave me a set of later model 350 heads. All I have to do is go get them, they are very low milage so as long as the center intake bolts arent canted I will use them, if not I have a core to use.
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
12-10-2019 07:07 PM
New2Chevy
Engine/Drivetrain/Suspension Parts for Sale
2
09-28-2015 12:35 AM