Help with fuel fittings and hose for aftermarket intake
04-05-2010, 04:46 PM
#1
Senior Member
Thread Starter
iTrader: (3)
Join Date: May 2009
Location: Buffalo, NY
Posts: 535
Likes: 0
Received 9 Likes
on
8 Posts
Car: 92 Z28
Engine: LS3
Transmission: TR6060
Axle/Gears: Strange S60 3.73
Help with fuel fittings and hose for aftermarket intake
Little confused here. I bought a FIRST TPI intake that has 3/8" NPT fuel rail fittings. Adjustable fuel pressure regulator (below) I'll be ordering also has 3'8" NPT fittings.
http://www.summitracing.com/parts/AEI-13301/
Most of fittings and hoses I see (Jegs, Summit) are AN sizes. Jegs does have a few fittings and hoses in 3/8" NPT size that I'm thinking of getting.
http://www.jegs.com/p/JEGS/JEGS-NPT-...63082/10002/-1
Will I be ok with these or should I get NPT to AN adapters and AN hosing? Also I'm assuming the stock fuel line to regulator is not 3/8". Does anybody know what size it is? I'm thinking I'll need an adapter to connect stock fuel line to Aeromotive AFPR. Thanks!
http://www.summitracing.com/parts/AEI-13301/
Most of fittings and hoses I see (Jegs, Summit) are AN sizes. Jegs does have a few fittings and hoses in 3/8" NPT size that I'm thinking of getting.
http://www.jegs.com/p/JEGS/JEGS-NPT-...63082/10002/-1
Will I be ok with these or should I get NPT to AN adapters and AN hosing? Also I'm assuming the stock fuel line to regulator is not 3/8". Does anybody know what size it is? I'm thinking I'll need an adapter to connect stock fuel line to Aeromotive AFPR. Thanks!
04-05-2010, 05:10 PM
#2
Re: Help with fuel fittings and hose for aftermarket intake
use npt to an adapters and then an hose ends and hose.
There are fittings available for the stock lines, they are 16 and 14mm x1.5 O ring
There are fittings available for the stock lines, they are 16 and 14mm x1.5 O ring
Last edited by Twin_Turbo; 04-06-2010 at 03:59 AM.
04-28-2010, 07:02 PM
#3
Senior Member
Thread Starter
iTrader: (3)
Join Date: May 2009
Location: Buffalo, NY
Posts: 535
Likes: 0
Received 9 Likes
on
8 Posts
Car: 92 Z28
Engine: LS3
Transmission: TR6060
Axle/Gears: Strange S60 3.73
Re: Help with fuel fittings and hose for aftermarket intake
Thanks for the info. Helped start to locate what parts I need. Hardest part is figuring what parts you need and then ordering them!
04-28-2010, 07:22 PM
#4
Supreme Member
iTrader: (33)
Join Date: Jul 2000
Location: Boosted Land
Posts: 5,945
Likes: 0
Received 1 Like
on
1 Post
Car: 92 Z28
Engine: Boosted LSX
Re: Help with fuel fittings and hose for aftermarket intake
Pure choice should have what ya need. I got a ki from them for my lt1 fuel line setup. Top quality. Good price , etc..
http://www.purechoicemotorsports.com...cat/cat133.htm
http://www.purechoicemotorsports.com...cat/cat133.htm
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM
9192camaro
Engine/Drivetrain/Suspension Parts for Sale
16
02-03-2019 12:21 AM
92camaroJoe
Tech / General Engine
6
08-13-2015 06:07 AM
