305 fly wheel with 350 later model
#1
Junior Member
Thread Starter
Join Date: Aug 2009
Location: Kansas city, Kansas
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Pontiac Trans Am
Engine: 305 smallblock aftermarket cam
Transmission: Borg warner T-5
Axle/Gears: 3.73
305 fly wheel with 350 later model
I have a 305 with a5 speed manual well i blew the 305 up and im wondering if i can use the flywheel off the 305 to the 350 which came out of a 88 tahoe.
#2
Moderator
iTrader: (14)
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes
on
34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
No. Your '85 has a two-piece rear main seal, and the '88 has a one-piece rear main seal. The flywheel mounting changed with the change in the seal type.
You need an '86-'92 f-body V8 flywheel. Doesn't matter that the factory only put them behind 305's, it'll mount and work just fine on a 350. Just ask for an '88 manual transmission flywheel.
You need an '86-'92 f-body V8 flywheel. Doesn't matter that the factory only put them behind 305's, it'll mount and work just fine on a 350. Just ask for an '88 manual transmission flywheel.
Thread
Thread Starter
Forum
Replies
Last Post