Which AFR heads do I need?
#51
Moderator
Thread Starter
Re: Which AFR heads do I need?
Cam (276HR10): http://www.compcams.com/Cam_Specs/Ca...?csid=188&sb=2
Rockers (1.6 Comp Pro Magnum): http://store.summitracing.com/partde...6&autoview=sku
Injectors (Ford 30lb): http://fuelinjectorconnection.com/sh...od&productId=5
Rockers (1.6 Comp Pro Magnum): http://store.summitracing.com/partde...6&autoview=sku
Injectors (Ford 30lb): http://fuelinjectorconnection.com/sh...od&productId=5
#53
Moderator
Thread Starter
Re: Which AFR heads do I need?
#54
Moderator
Thread Starter
Re: Which AFR heads do I need?
Thanks again guys. Just waiting on a water neck to come.
#55
Moderator
Thread Starter
Re: Which AFR heads do I need?
First start:
http://www.youtube.com/watch?v=wVk-C8jOEmQ
Warm idle:
http://www.youtube.com/watch?v=7BAocE35AhI
Drive away:
http://www.youtube.com/watch?v=EvSuL_VHwvw
For the stock tune, it runs WAY better than I thought. Obviously it runs too rich with the 30lb injectors. Idles good in park @750 rpm. But the idle speed in drive/reverse is too low. The car almost wants to stall. For a stock stall, and 2.77 gears, it is not slugish off the line. I was VERY surprised. Plenty of torque too and I'm running open headers.
http://www.youtube.com/watch?v=wVk-C8jOEmQ
Warm idle:
http://www.youtube.com/watch?v=7BAocE35AhI
Drive away:
http://www.youtube.com/watch?v=EvSuL_VHwvw
For the stock tune, it runs WAY better than I thought. Obviously it runs too rich with the 30lb injectors. Idles good in park @750 rpm. But the idle speed in drive/reverse is too low. The car almost wants to stall. For a stock stall, and 2.77 gears, it is not slugish off the line. I was VERY surprised. Plenty of torque too and I'm running open headers.
#56
Supreme Member
iTrader: (20)
Re: Which AFR heads do I need?
Abit more lopey than I thought but will be a strong running car thats for sure! MAF cars can take some mods and still work somewhat ok on stock tune. Glad to see its running tho. Congrats. Very nice combination there in a very nice car.
#57
Moderator
Thread Starter
Re: Which AFR heads do I need?
And a big thank you to everyone else in this thread too that helped me! (Air_Adam, GTA Sammy, 1989GTATransAm)
Orr, I see you put your AFPR in the same way I did. How the heck did you get to that screw to adjust it. Looks like it's going to be a challenge for me!
Last edited by IROCThe5.7L; 06-28-2009 at 03:49 PM.
Thread
Thread Starter
Forum
Replies
Last Post
92projectcamaro
Engine/Drivetrain/Suspension Parts for Sale
11
01-18-2016 08:00 AM
New2Chevy
Engine/Drivetrain/Suspension Parts for Sale
2
09-28-2015 12:35 AM