vibrations
04-01-2003, 09:32 PM
#1
Junior Member
Thread Starter
Join Date: Sep 2002
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Camaro
Engine: 383
Transmission: 700r4
vibrations
HITHERE am getting HITHERE really bad vibration aroung 65-70 mph, it seems to be coming from the driveline somewhere. It also seems to get worse when HITHERE take it out of gear and let it coast at that mph. Does anyone know what could be causing this?
thanks
thanks
04-02-2003, 05:04 AM
#2
Supreme Member
Join Date: Nov 2001
Location: heartland
Posts: 2,743
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89rs (previous 2.8)
Engine: 406
Transmission: 700r4 (for now)
tires out of balance...driveshaft (common).u-joint....tranny mount...motor mount....steering components.....I would start with having the tires balanced.
04-03-2003, 05:38 PM
#3
Junior Member
Thread Starter
Join Date: Sep 2002
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Camaro
Engine: 383
Transmission: 700r4
Well I took the driveshaft out and had it checked and it was out of balance while the shaft was out I turned the pinion just to check and I could feel the bearing grinding. I have not pulled it apart yet to verify but I hope it is only the bearings.
04-03-2003, 10:31 PM
#4
Supreme Member
Join Date: Nov 2001
Location: heartland
Posts: 2,743
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89rs (previous 2.8)
Engine: 406
Transmission: 700r4 (for now)
sounds like you found your problem...or problems .
....hopefully there is no damage in the rear..is the gear oil up to level? usually there will be some leakage with the bad bearing......any problems there?
....hopefully there is no damage in the rear..is the gear oil up to level? usually there will be some leakage with the bad bearing......any problems there? Last edited by Riley's35089rs+; 04-03-2003 at 10:34 PM.
04-04-2003, 11:36 PM
#5
Junior Member
Thread Starter
Join Date: Sep 2002
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Camaro
Engine: 383
Transmission: 700r4
well I had to replace the pinion bearings but the gears were ok, I did find out that I have 3.23 gears and not 3.42 gears so I quess I need to change my sig.
04-05-2003, 01:54 AM
#6
Supreme Member
Join Date: Nov 2001
Location: heartland
Posts: 2,743
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89rs (previous 2.8)
Engine: 406
Transmission: 700r4 (for now)
amazing what you can discover, when you remove the cover!
Wow! I 'm a poet!
Have a great weekend!
Wow! I 'm a poet!
Have a great weekend!
Thread
Thread Starter
Forum
Replies
Last Post
roysatikas
Transmissions and Drivetrain
0
09-22-2015 08:15 PM