CFI FUEL RETURN LINE
#1
Member
Thread Starter
Join Date: Aug 2009
Location: Chicagoland south suburbs
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 Z28
Engine: 350
Transmission: Turbo 200C
Axle/Gears: 3.43
CFI FUEL RETURN LINE
i have a major issue. the fuel return line on my 82 Z28 was stuck. so when i pulled the motor i cut the line while in the process it shredded the fitting. and now that im trying to rebuild the line i cant find the fitting anywhere. and better yet i cant get Neither NPT or AN fittings to work. does anybody know what the fitting thread size is or where i can find it. i have the big fitting that is direct to the throttle body its the one on the actual line that i need. id prefer to make a steel braided return line because thats what ive done for everything else so far but i will work with a regular stainless line if needed. please help
#2
Re: CFI FUEL RETURN LINE
I had a crossfire on my 84 vette, the return line was a double flare (no o ring) type, the line is probably the same as those 5/16 lines at the parts stores, US thread.
Remove the fitting from the throttle body & take it with you to the parts store.
Remove the fitting from the throttle body & take it with you to the parts store.
Thread
Thread Starter
Forum
Replies
Last Post
AkDrifted
Engine/Drivetrain/Suspension Parts for Sale
6
08-17-2015 07:45 PM