Power Steering Return Hose Connector
#1
Member
Thread Starter
Power Steering Return Hose Connector
This is from my 1984 Trans AM power steering box.
I need to purchase the connector or the sealing ring. I believe it is the "ring" that is causing the leak.
I have o-rings but they seem thinner than the "ring" that is on connector.
Worst case I can try an o-ring or apply a little sealant about the current "ring".
Suggestions?
I need to purchase the connector or the sealing ring. I believe it is the "ring" that is causing the leak.
I have o-rings but they seem thinner than the "ring" that is on connector.
Worst case I can try an o-ring or apply a little sealant about the current "ring".
Suggestions?
#3
Supreme Member
iTrader: (1)
Join Date: Sep 2005
Posts: 26,123
Received 1,688 Likes
on
1,283 Posts
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: Power Steering Return Hose Connector
Go buy one of those assortments that has about a pound of all the various sizes in it. No doubt there'll be one that fits. It'll cost the same as ONE that you'd look up as "Saginaw power steering O-ring", and you'll still have about .995 pounds left for other things.
Thread
Thread Starter
Forum
Replies
Last Post
nickyakker
Engine Swap
2
08-08-2012 07:17 PM