Stock space between centre link and oil cooler lines
08-17-2022, 03:24 PM
#1
Stock space between centre link and oil cooler lines
Grateful if someone has this measurement to hand to post it
I have a 91 TA with a L31 fitted by me on stock engine mounts. I put the engine oil cooler from the 305 tpi that came out and it required a tad bit of messaging to fit
Seems like I have only a few mm between the dual steel oil cooler lines and the steering centre link and which irrespective I will look at improving but a stock gap reference would be helpful
Thanks!
I have a 91 TA with a L31 fitted by me on stock engine mounts. I put the engine oil cooler from the 305 tpi that came out and it required a tad bit of messaging to fit
Seems like I have only a few mm between the dual steel oil cooler lines and the steering centre link and which irrespective I will look at improving but a stock gap reference would be helpful
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
hawksthirdgen
History / Originality
1
02-04-2010 10:52 AM