s10 gear box vs camaro p/s
02-16-2006, 12:32 PM
#1
Member
Thread Starter
Join Date: Feb 2004
Location: Canada Quebec
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 camaro
Engine: L69 305
Transmission: TH350 3000stall
Axle/Gears: 3.42
s10 gear box vs camaro p/s
Easy swap ... grind s10 box mounting ears pads flat grind the sway bar braket interchange the pitman arm
Last edited by smoktire; 02-17-2006 at 01:39 AM.
02-16-2006, 09:43 PM
#3
Moderator
Join Date: Jul 1999
Location: 51°N 114°W, 3500'
Posts: 17,120
Likes: 0
Received 123 Likes
on
104 Posts
Car: 87 IROC L98
Engine: 588 Alcohol BBC
Transmission: Powerglide
Axle/Gears: Ford 9"/31 spline spool/4.86
I didn't grind the mounting ears on my S10 box and I don't have a sway bar to get in the way. I did use the third gen pitman arm though to keep the same steering geometry.
You need a 84 and up S10 box. As in the above picture, it has 4 bolts on the top cover. The earlier boxes have 3 bolts on the top cover. Although I haven't checked, the input shaft and sector shaft should be a different size making the swap a little more difficult with an early box.
The manual steering box can be found in S10's that originally came with the Iron Duke 2.5L 4 cylinder engine however not all 4 cylinder S10's came with manual steering.
You need a 84 and up S10 box. As in the above picture, it has 4 bolts on the top cover. The earlier boxes have 3 bolts on the top cover. Although I haven't checked, the input shaft and sector shaft should be a different size making the swap a little more difficult with an early box.
The manual steering box can be found in S10's that originally came with the Iron Duke 2.5L 4 cylinder engine however not all 4 cylinder S10's came with manual steering.
Last edited by AlkyIROC; 02-16-2006 at 09:45 PM.
Thread
Thread Starter
Forum
Replies
Last Post
hectre13
Engine/Drivetrain/Suspension Parts for Sale
7
08-26-2015 08:17 AM
mcquigg
Engine/Drivetrain/Suspension Parts for Sale
0
08-13-2015 02:26 PM
