Impala SS rim fitment
03-03-2005, 12:15 AM
#1
TGO Supporter
Thread Starter
Join Date: Jul 2003
Location: Grand Rapids, MI
Posts: 4,803
Likes: 0
Received 0 Likes
on
0 Posts
Car: Z28
Engine: Sb2.2 406
Transmission: Jerico 4 speed
Axle/Gears: Ford 9" 3.60
Impala SS rim fitment
Does anyone know if the 17" Impala SS rim will clear a 13" brake setup? (I know about the bolt pattern issue and am converting to 5x5).
03-03-2005, 02:56 PM
#2
Banned
Join Date: Jan 2005
Location: Yes I'm Dean
Posts: 1,238
Likes: 0
Received 0 Likes
on
0 Posts
Car: Agood2.8,
Engine: V6rsr,
Transmission: Afrikingoodtime
Depends on the calipers your using.
I see your "current project" lists using Wilwood so you will be fine. Wilwoods will clear stock 16" Iroc alloy rims and the GTA 16" rims in dia. So the 17" Impala SS rims would clear fine in diameter. Even if they are 1/2" thicker casting, they will fit. No rim is going to be a 1/2" thicker thoguh, Thats just dead weight and a waste of alloy.
I see your "current project" lists using Wilwood so you will be fine. Wilwoods will clear stock 16" Iroc alloy rims and the GTA 16" rims in dia. So the 17" Impala SS rims would clear fine in diameter. Even if they are 1/2" thicker casting, they will fit. No rim is going to be a 1/2" thicker thoguh, Thats just dead weight and a waste of alloy.
03-03-2005, 09:19 PM
#4
TGO Supporter
Thread Starter
Join Date: Jul 2003
Location: Grand Rapids, MI
Posts: 4,803
Likes: 0
Received 0 Likes
on
0 Posts
Car: Z28
Engine: Sb2.2 406
Transmission: Jerico 4 speed
Axle/Gears: Ford 9" 3.60
Thanks for the info, Dean. I don't know about the actual exterior dimensions for the caliper compared to yours as yours are radial mount, IIRC, but I don't see that being an issue. I think my biggest concern is if they will clear on the sides.
redimp, I will post pictures eventually.
redimp, I will post pictures eventually.
Thread
Thread Starter
Forum
Replies
Last Post
LiquidBlue
Wheels and Tires
32
12-10-2019 04:06 PM
