PBR brake pad ID
09-24-2004, 06:15 PM
#1
Moderator
Thread Starter
iTrader: (1)
Join Date: Mar 2002
Location: Chasing Electrons
Posts: 18,405
Likes: 0
Received 216 Likes
on
202 Posts
Car: check
Engine: check
Transmission: check
PBR brake pad ID
Have a set of PBR brake pads here that I am not sure of the type. They have printed on the pad material edge the following:
JB CP26 FE
I searched the web high & low and couldn't come up with anything for that number.
The pad surface itself has a semi-metallic look but not of copper. More of a fine shiney steel look. Would these pads possibly be the 'Metal Master' PBR pads? The pad manufacturer is PBR as that is stamped into the pad backing plate.
As further reference the pads are from a C4 with 12" brakes. Came with the full calipers I picked up for my brake upgrade on the '92.
RBob.
JB CP26 FE
I searched the web high & low and couldn't come up with anything for that number.
The pad surface itself has a semi-metallic look but not of copper. More of a fine shiney steel look. Would these pads possibly be the 'Metal Master' PBR pads? The pad manufacturer is PBR as that is stamped into the pad backing plate.
As further reference the pads are from a C4 with 12" brakes. Came with the full calipers I picked up for my brake upgrade on the '92.
RBob.
Last edited by RBob; 09-24-2004 at 06:18 PM.
Thread
Thread Starter
Forum
Replies
Last Post
dbrochard
Engine/Drivetrain/Suspension Parts for Sale
6
09-19-2015 08:13 PM
