Super Ram AFR Heads
#1
Super Ram AFR Heads
I tried to sell my 1988 Corvette but have received no interest at a reasonable price. So, I'm thinking of parting it out. Let me know if you're interested in the following parts.
Super Ram already welded and ported out with an Edelbrock intake also welded and hogged out.
AFR 195 heads with 7/16" studs.
XFI268 cam
BBK 58mm throttle body
Ultra Pro Magnum; Rocker Arm; Stud 7/16 in. Ratio 1.6
Super Ram already welded and ported out with an Edelbrock intake also welded and hogged out.
AFR 195 heads with 7/16" studs.
XFI268 cam
BBK 58mm throttle body
Ultra Pro Magnum; Rocker Arm; Stud 7/16 in. Ratio 1.6
#2
Supreme Member
iTrader: (8)
Join Date: Oct 2001
Location: Il
Posts: 11,723
Received 773 Likes
on
520 Posts
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: Super Ram AFR Heads
Throw some prices up for your parts when you get a min.
#6
Re: Super Ram AFR Heads
Sorry for the late reply guys. The super ram and intake went within a couple of hours after posting.
I have the AFR 195 L98 65cc heads off the car now. I'll take what I paid for them, $1,000. They're in great condition. I'll through in the 1.6 rockers for an additional $100. The rockers are much better than the Scorpions.
I'll let the XFI268 go for $200.
Yeah Kevin, all the corvette guys wanted the car for almost free. It was running and only needed the camber rod and end links replaced. I just don't have room for it anymore and the Camaro is running good. I did buy a used RV which will go in the Corvettes spot once I'm done parting it out.
I have the AFR 195 L98 65cc heads off the car now. I'll take what I paid for them, $1,000. They're in great condition. I'll through in the 1.6 rockers for an additional $100. The rockers are much better than the Scorpions.
I'll let the XFI268 go for $200.
Yeah Kevin, all the corvette guys wanted the car for almost free. It was running and only needed the camber rod and end links replaced. I just don't have room for it anymore and the Camaro is running good. I did buy a used RV which will go in the Corvettes spot once I'm done parting it out.
The following users liked this post:
vtwinsroc (04-16-2021)
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
IROCZ1989
Engine/Drivetrain/Suspension Parts for Sale
63
10-07-2013 11:26 AM
PAFORM350
Engine/Drivetrain/Suspension Parts for Sale
14
10-09-2008 12:45 AM