drknow90rs_ss@y

iTrader: (3)

I have been thinking of a way to network, to get the parts we need. Maybe this is the way..... If you need a part that someone in the SW region might have, post it here. This is not a thread for things you have for sale. Start a new thread for that. I'll go first....


I NEED: A parking brake cable for an 86 IROC with 10 bolt disc rear end. Also park brake lever/handle.

Seems simple, let's see if it works...

92WhiteZ28

iTrader: (1)

hey, i have that.

drknow90rs_ss@y

iTrader: (3)

SEE? LOL Its working already!!!!!!!!!

DocHoliday

I NEED: Hood struts and hatch stuts, used or new, just as long as they work. Hopefully cheaper than new! Sick of proping them up with a stick, heh. Thanks

Kyle

sfeeney

iTrader: (1)

doc i should have both of those i believe...

and i also have the parking brake handle leather or good plastic

i would recommend going to checker for the brake cable the raybestos they sell fit great and are cheap vs napa or autozone etc that i could not get the supposed cable to work.

sfeeney

iTrader: (1)

I need hrmmm..

long tube headers...

a straight all power drivers and passanger door ....

a cowl hood of somesort

rear disc parts to convert my rear

new main dash not the dashpad.. no cracks in near mint shape.

front nose iroc or rs style not warped no cracks..

electrical work that i dont want to do <--lol

msd wires

T56 or a good t5 rebuild with stout parts

tubular k member

new weather stripping

grant steering wheel

BluFBdy

iTrader: (1)

i need:

91-92 gfx in good condition

Rear disk brake setup in good condition

AIR compatible headers

Heres a longshot..... eaton posi unit for 26spline axles/3.73 gears (too specific maybe?? lol)

and finally somebody with a welder that can weld my i-pipe up (properly) in a few weeks

drknow90rs_ss@y

iTrader: (3)

Ok, this seems to be working...
master_disaster; 92whitez28 has some of the 91-92 gfx you want. He has rear cover, rear quarter extensions both door filler panels,and drivers side rocker panel. PM him and let him know you are interested.....

sfeeney; 92whitez28 might have the main dash you need... I didnt think checker sold them for the disc rear... I will check it out. Thanks!!

BluFBdy

iTrader: (1)

well i already got the cluster, gas door and exhaust off that iroc hes parting out i took a look at the gfx and the passenger side is all busted plus if i remember someone already showed interest in the chin spoiler, if the passenger side wasnt destroyed i would have taken those too lol im just trying to get it all in one complete set

i do like the idea of this thread way to go

azfirebird

iTrader: (2)

9 bolt cover

BluFBdy

iTrader: (1)

unfortunately i say toss the 9 bolt, theyre nice but parts for them are harder than hell to find, 10 bolts have more readily available parts at alot nicer prices

mario82z28

I have long tube headers taking up space in my garage they're headman headers

drknow90rs_ss@y

iTrader: (3)

Thanks, master_disaster. I got the 91-92 gfx for my RS from about 4 different cars. It is really hard to find all of the pieces on one car. I would take the parts he has and then you just need the chin and high rise. The chin is the hardest piece to find.
Thanks!

sfeeney

iTrader: (1)

Ok Mario i want those long tubes for sure....
as long as they are in decent shape.. what size collectors are they

I have a 10 bolt posi at my place if you ditch the 9 bolt

If not there is a 9 bolt on a blue and gray firebird transam at pull a part on 27th ave and lincoln that you could get parts from for your 9 bolt

If that dash is near mint not cracked or warped and still looking good im down...

mario82z28

pm sent sfeeny

azfirebird

iTrader: (2)

How about a 9 Bolt Diff cover?? Anyone have luck with getting past emissions? The previous owner removed the Air injection tubes, Cat, and Diverter valve. I have gotten the diverter valve and cat fixed but I do not have the air injection system on. Any suggestions.

jstrdn90rs

I am still looking for a dual snorkle filter assembly?..and a camaro or iroc grill?.I replied about that car your parting out and dont know if you have them still or not?still interested..I am also looking for a fiberglass hood (no flat ones)something with a cowl or other...pin or bolt on dont care.And lastly I need a women who likes to spend money on car parts..ANyOne????..

drknow90rs_ss@y

iTrader: (3)

azfirebird, what engine do you have, what year and what parts do you need?

As for a woman who loves to spend money on car parts, I have one. (But I'm keeping her, Married her to make sure she dosent get away) I'll let you know if I find another one.....

BluFBdy

iTrader: (1)

hey sean do you know what posi and gears are in there? the one i picked up has an eaton grenadelock in it lol hows the brake setup lookin on that cuz if its better than mine i may just have to take it off your hands instead of buying new calipers for this one

azfirebird

iTrader: (2)

350 5.7L I need diff cover and trunk electric latch system to include wiring and bracket.

sfeeney

iTrader: (1)

i have an electric trunk pop with alot of wiring..

i also posted i have a complete 10 bolt posi or

there is a blue firebird at the pull a part junkyard on 27th and lincoln with a 9 bolt rear end in it. you could get parts from it

azfirebird

iTrader: (2)

Thank you for this I would be interested in the electric lock what are you asking for it?

drknow90rs_ss@y

iTrader: (3)

OK, My turn... I need a set of trans-am crosslace wheels (16") With or without tires, is ok....

burnout88

I need a lower center console a Camaro with no cracks, holes drilled in, sun faded and the radio mounting tabs not broken off. Also need one that does not have carpet glued to it.

I know I am dreaming about this. As from what I can tell a part like this does not exist in used condition.

drknow90rs_ss@y

iTrader: (3)

I would say you should be able to find that. (might not be able to get it without the carpet, but hey, you can ask!!)

sfeeney

iTrader: (1)

I have lots of parts from an 87 iroc let me know what you guys might need

andresinibus

I have a 700R4 with the electronic speedometer and electronic lock up comes with torque converter also includes new transmission mount and cross member. slips on first i believe its a 26 spline open to offers will fit Chevy truck camaros firebirds trans ams

birdtojag

iTrader: (1)

AZfirebird, I have the 9-bolt cover. Where are you located and stuff? PM me your number and I'll get back to you as soon as I can.

sfeeney

iTrader: (1)

Does anyone have a muffler that is 1 in and 2 out like a 80 series
my buddy needs one bad
anyone have something like that lieing around....

BluFBdy

iTrader: (1)

well i have my flowmaster i have to install if he wants my stock one that'd work lol just have to get a welder so i can install it

drknow90rs_ss@y

iTrader: (3)

I need a RED 85-90 trans-am bumper cover. (Front) Also front fender extensions to match.

fast86z28

Just met a guy at the carwash, he just bought an LO3 RS..Needs a Radiator and front grille...I told him I'd see if I could find him one..

sfeeney

iTrader: (1)

i have a radiator and a front grill...

toms84ss

iTrader: (1)

Drknow, I have a set of GTA wheels if you still need a set.

TonyC

iTrader: (1)

I have a Hooker Aerochamber setup, 3" in, dual 2.5" out with chrome quad tips. It's a slick looking setup, sounds great too, let me know if you're interested.


I have an electric trunk latch that needs new rails (from top down solutions), that I'd be willing to let go for cheap, lemme know!

drknow90rs_ss@y

iTrader: (3)

PM sent toms84ss.......................

squirted1

iTrader: (2)

I have a BBK 58mm tb, barely used, looking for a good home.

drknow90rs_ss@y

iTrader: (3)

I have a tpi 305 with all accs looking for a good home...

Arvizu9618

iTrader: (1)

I need a center console door, Black for a 85-92 Thirdgen

Art

I also need a wiring diagram for the rear hatch lock and courtesy light system
for same car, keep popping 20amp fuse for courtesy lights when i try to open rear hatch and it doesn't open. closes fine.

BluFBdy

iTrader: (1)

well i cant help with the door but i can help you with the wiring part.

Heres a link to Autozones site, they have all the wiring diagrams online just choose the one that fits your application, should be under body wiring/ body continued if i remember correctly.

Keep in mind that your courtesy lights, cigar lighter, and hatch plus a few others are all tied into that circuit. Should all have orange wires running to them denoting the Acc. Fuse, the 20 amp you keep blowing. Id check your cigar lighter, mine kept blowing the fuse when i hit a good bump the side would short out. I just took it out and pulled it apart, cleaned it up and put it back, works fine now
Hope this helps

Beater79TA

I actually have a set of these off a 92 in white. The person that removed them from the wreck cut the wires though so splicing it all together might take some work.

If you want them, PM me with an offer.

Railguy

iTrader: (4)

Im not in need right now just wanted you to know i am watching this thread wait does new mexico count as we dont seem too be one of the 50 states hahhaa


Rail

drknow90rs_ss@y

iTrader: (3)

Arvizu, do you men for a firebird or camaro? I have a few from a firebird but none from a camaro.

TheScaryOne

iTrader: (3)

Well, let's see here....

I need a passenger side AIR tube for a 88-92 305/350
I need a front bumper cover for an IROC
I need an IROC hood, with or without louvers, no damage.
I need T-Top weatherstripping.
I need someone who knows how to align the windows inside of the doors.
I need a set of t-top sunshades, factory preferred.
I need the little pieces of trim that clip over the ends of the shocks in the hatch in black.
I need someone who has an idea of how to align the trunk panels, one of mine dips in and drives me nuts.
I need someone who is decent with seam sealer, because some of my seams had mold in them, and I scraped them out and no longer trust myself to finish the job.
I need a hood pop latch assembly.
I need a driver's side underdash panel, with or without the fuse panel piece.
I could use a console lid in better condition than my own.
I need someone local who wouldn't mind showing a newb the ways of sanding priming and other paint prep. :3

Uhm. I think that's it. Probably not.

jmd

iTrader: (4)

I need a 153 tooth manual SBC (85-down or 86-up) flywheel. If it's new and you're not using it, I'll borrow or consider buying from you. If it's used and can't be turned anymore or has chipped teeth, I still need it. It's for mockup purposes only.

AZKING

I NEED THE CABLE THAT CONTROLES MY DRIVER SIDE MIRROR AND I WANT A SS HOOD FOR MY 89 CONVERTABLE

drknow90rs_ss@y

iTrader: (3)

sfeeney should have that cable, azking. He is a few posts above....

BluFBdy

iTrader: (1)

first caps lock is not your friend..... its rude and offensive to most people.

Second, ^ hes right, sfeeny is the go to guy for parts, i get most of my stuff from him because hes constantly parting cars, chances are hes got the parts youll need,, always good prices too.

Not to mention between all the members on the SW boards, there is a wealth of information on parts and whos got what, i just wish sfeeny would post up that contacts list lol, send him your info and hell add you

Arizona IROC

iTrader: (4)

I need a front bumper cover for my IROC.
I have some body parts to trade or sell cheap!!

Arizona IROC

iTrader: (4)

[quote=sfeeney;3856983].

a straight all power drivers and passanger door ....

[quote]

I have a nice power ps door