Inspection park brake issue
03-16-2021, 10:07 AM
#1
Supreme Member
Thread Starter
iTrader: (1)
Join Date: Sep 2010
Location: Georgetown TX
Posts: 1,928
Likes: 0
Received 0 Likes
on
0 Posts
Car: Base 91 'bird
Engine: 3.1 v6
Transmission: 4L60
Axle/Gears: 9-bolt 3.27 & PBR
Inspection park brake issue
When I was moved from CA to TX 5 plus years ago I tried to register the Firebird which required an inspection. It failed because the tech applied the park brake and with the car in gear gave it some gas. The car moved so failed. I think it's an odd test but if that's the case... I know the park brake is not great but any suggested improvements other than adjusting and hauling on the lever?
03-19-2021, 12:10 AM
#2
Junior Member
Join Date: Oct 2013
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Re: Inspection park brake issue
You may want to try a different testing station. I find the Chain locations (i.e. Jiffy lube) are far pickier. I typically take mine to a drive through oil change station (Take5) to get mine done. Have never had to do this test.
04-04-2021, 03:42 PM
#3
Supreme Member
iTrader: (3)
Join Date: Jan 2001
Location: Conroe, TX
Posts: 3,165
Received 54 Likes
on
40 Posts
Car: 1987 GTA
Engine: LS1
Transmission: 4L60e
Re: Inspection park brake issue
Agreed. From my recollection, procedure is to place the vehicle in drive with the parking brake engaged and see if it rolls. They should not apply the gas.
Thread
Thread Starter
Forum
Replies
Last Post