Texans!!!!!
#1
Junior Member
Thread Starter
Join Date: Jul 2009
Location: W Houston
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Camaro Sport Coupe
Engine: V8, 5.0L, 305, 4BL Carb
Transmission: Original
Axle/Gears: Original
Texans!!!!!
Lets meet Sep 13 at a BWW to watch the Texans play their first Season game!
#4
Junior Member
Thread Starter
Join Date: Jul 2009
Location: W Houston
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Camaro Sport Coupe
Engine: V8, 5.0L, 305, 4BL Carb
Transmission: Original
Axle/Gears: Original
Re: Texans!!!!!
Well, I didnt want to put a specific BWW, because I wanted to get us to agree on one, to be fair , not just closest to me.
#6
Moderator
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
Re: Texans!!!!!
Fair Enough.
This one is pretty centrally located..even if parking isn't great:
Phone: 713-521-1100
2525 Rice Boulevard
Houston, TX 77005-3220
That is where Houston-f-body used to meet every Thursday (for $0.25 wings) back in the day. But I suppose "Central" depends on who is going.
This one is pretty centrally located..even if parking isn't great:
Phone: 713-521-1100
2525 Rice Boulevard
Houston, TX 77005-3220
That is where Houston-f-body used to meet every Thursday (for $0.25 wings) back in the day. But I suppose "Central" depends on who is going.
#7
Junior Member
Thread Starter
Join Date: Jul 2009
Location: W Houston
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Camaro Sport Coupe
Engine: V8, 5.0L, 305, 4BL Carb
Transmission: Original
Axle/Gears: Original
Re: Texans!!!!!
If that is where F-Body use to meet then we should stick to it, I could be there early to see about parking, where we can try to park together, and reserve some seats. If we can get a good response to this meet, then I could call asap and reserve some spots and probably parking.
Last edited by OceanBlue85; 08-27-2009 at 02:56 PM.
Trending Topics
#12
Supreme Member
iTrader: (2)
Join Date: Mar 2002
Location: West Houston, Tx.
Posts: 1,029
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 Z28
Engine: 355 TPI
Transmission: 700r4
Axle/Gears: 9 bolt disc / 3:27
Re: Texans!!!!!
man found out yesterday that my motor is NEW... bout crapped my pants... got some pictures of the motor being built by the guy I bought it from and the block was brand spanking new... old block was bad or something to that effect... I gotta get this car up and running to make it to some events... oh and it would be nice to actually drive it lol
#13
Junior Member
Thread Starter
Join Date: Jul 2009
Location: W Houston
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Camaro Sport Coupe
Engine: V8, 5.0L, 305, 4BL Carb
Transmission: Original
Axle/Gears: Original
Re: Texans!!!!!
That is crazy, well just give me a heads up when you want some help.
#14
Supreme Member
iTrader: (2)
Join Date: Mar 2002
Location: West Houston, Tx.
Posts: 1,029
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 Z28
Engine: 355 TPI
Transmission: 700r4
Axle/Gears: 9 bolt disc / 3:27
Re: Texans!!!!!
Hey Blue what are you up to this coming Sat... I'm tired of my car sitting on jack stands... You ever change out valve springs without pulling the heads??? This is the list I have left
1- valve springs
2- valve covers
3- repair electrical
4- replace tranny pan gasket
5- new tranny pan bolts and adjust cable
6- install y pipe
7- install smog and hoses
I think thats it to get her running again. I'm going to pull the intake port and polish it and strip the wheels... I also have some rust that I have to cut out and replace..
1- valve springs
2- valve covers
3- repair electrical
4- replace tranny pan gasket
5- new tranny pan bolts and adjust cable
6- install y pipe
7- install smog and hoses
I think thats it to get her running again. I'm going to pull the intake port and polish it and strip the wheels... I also have some rust that I have to cut out and replace..
#16
Supreme Member
iTrader: (2)
Join Date: Mar 2002
Location: West Houston, Tx.
Posts: 1,029
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 Z28
Engine: 355 TPI
Transmission: 700r4
Axle/Gears: 9 bolt disc / 3:27
Re: Texans!!!!!
I have both yet never changed out valve spring before... I'll be the first to say.. I'm not too sure about doing it but I have to try inorder to save 480 bucks the hot rod shop wanted to charge me.. I'm going to buy the valve spring compressor this week... y you wanna help lance?
#17
Moderator
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
Re: Texans!!!!!
With the right valve spring compressor tool, it is a piece of cake.
With a cheesy tool it will be a PITA.
SofaKingdon turned me on to the "right" tool.
http://www.summitracing.com/parts/SUM-906784/
I didn't use a compressor or compression gauge either. I put each cylinder at TDC when I was working on it.
With a cheesy tool it will be a PITA.
SofaKingdon turned me on to the "right" tool.
http://www.summitracing.com/parts/SUM-906784/
I didn't use a compressor or compression gauge either. I put each cylinder at TDC when I was working on it.
#18
Supreme Member
iTrader: (2)
Join Date: Mar 2002
Location: West Houston, Tx.
Posts: 1,029
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 Z28
Engine: 355 TPI
Transmission: 700r4
Axle/Gears: 9 bolt disc / 3:27
Re: Texans!!!!!
how do you prevent the valves from dropping into the cyclinder if you don't use an air compressor? do you just turn the motor til both the valves are closed and then change the springs?
#19
Moderator
iTrader: (6)
Join Date: Nov 2002
Location: North of Houston
Posts: 2,004
Likes: 0
Received 8 Likes
on
6 Posts
Car: '82 Camaro 11.7@121
Engine: 377
Transmission: 400
Axle/Gears: Dana 44 / 3.31:1
Re: Texans!!!!!
That tool not only lets you push the lever from any direction (360*), but it also locks in place. Like most things, with the right tool, it is easy. That IS the right tool.
#20
Supreme Member
iTrader: (2)
Join Date: Mar 2002
Location: West Houston, Tx.
Posts: 1,029
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 Z28
Engine: 355 TPI
Transmission: 700r4
Axle/Gears: 9 bolt disc / 3:27
Re: Texans!!!!!
nice I'm going to start them next weekend hopefully it will go smoothly... Could use some help because I've never done them before but not saying I'm not willing to give it the old whole hearted try... Oh I'm posting some parts off my current car i'm not going to use if anyone wants them.. should be a tach and black out tail light covers
Thread
Thread Starter
Forum
Replies
Last Post
Reid Fleming
South Central Region
25
11-16-2008 09:14 PM