please advice quick.
06-10-2007, 08:39 PM
#3
Junior Member
Thread Starter
iTrader: (1)
Join Date: May 2007
Location: houston, tx
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Car: 08 cobalt ss turbo, workin on iroc
Engine: 355
Transmission: 700r4
Re: please advice quick.
700r4 automatic. would i be able to use a 355 with the 700r4.
06-10-2007, 11:11 PM
#4
Supreme Member
iTrader: (1)
Join Date: May 2004
Location: houston
Posts: 2,262
Likes: 0
Received 0 Likes
on
0 Posts
Car: 83 POS monte carlo 2015 chevy P/U
Engine: 92 5.7 tpi 5.3
Transmission: 700r4 6L60E
Axle/Gears: 2.42 too high
Re: please advice quick.
it depends on how strong the motor you build is as to how long the trans lasts.
you could build a killer 283 & smoke a stock trans on the first pass.
a mild 355 shouldn't be any problem for a stock 700.
how much power are you talking about, over 350HP?
you can build a 700 to handle more power, how much more power depends on how much you want to spend. a well built 700 with the right converter can take 600 HP & 600 pounds of torque.
of course a used stock trans won't handle as much power as a brand new stock trans will, parts get weak & wear out from use.
you can talk to Owen at ARD if you need something stronger than stock, he knows his stuff.
you could build a killer 283 & smoke a stock trans on the first pass.
a mild 355 shouldn't be any problem for a stock 700.
how much power are you talking about, over 350HP?
you can build a 700 to handle more power, how much more power depends on how much you want to spend. a well built 700 with the right converter can take 600 HP & 600 pounds of torque.
of course a used stock trans won't handle as much power as a brand new stock trans will, parts get weak & wear out from use.
you can talk to Owen at ARD if you need something stronger than stock, he knows his stuff.
Thread
Thread Starter
Forum
Replies
Last Post
HoosierinWA
Tech / General Engine
5
10-07-2015 10:15 AM